12 Valve 2nd Gen Dodge Cummins 94-98 Discussion of 12 Valve 5.9 Liter Dodge Cummins Diesels with P7100 Injection Pumps

Cold start issue

Thread Tools
 
Search this Thread
 
  #1  
Old 12-01-2013, 05:13 PM
1badeagle's Avatar
Diesel Fan
Thread Starter
Join Date: Aug 2008
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default Cold start issue

Hey guys. I am having an issue with my truck. If I let it sit overnight or while I'm at work it is acting crazy. To get it to start it either has to roll over a few seconds once the light goes out, or you can just tap the throttle and it fires right up. After it's started it idles perfectly, but once you put it in gear it wants to back and miss bad for a minute. Does this sound like a bad lift pump that is losing prime while sitting for an extended period? I'm just trying to see if this is a good time to go to an aftermarket one.


Thanks

Dustin

96 cummins, auto, blocked gate, full cuts, 7" stack, Bhaf, ats triple, valve body
 
  #2  
Old 12-01-2013, 05:24 PM
turbo2332's Avatar
Diesel Bomber
Join Date: Jun 2011
Location: Indiana
Posts: 2,171
Received 104 Likes on 101 Posts
Default

it sounds like the governor springs arnt adjusted right and your idle is to low.
 
  #3  
Old 12-01-2013, 05:26 PM
JBearSVT's Avatar
Diesel Bomber
Join Date: Oct 2010
Location: New England
Posts: 1,325
Likes: 0
Received 59 Likes on 58 Posts
Default

^

Also: you should be tapping the throttle to get it to fire right up.
 
  #4  
Old 12-01-2013, 05:32 PM
Slim Whitey's Avatar
Diesel Enthusiast
Join Date: Dec 2011
Location: Prince Albert
Posts: 337
Received 5 Likes on 5 Posts
Default

my truck says on the drivers side visor that to start the thing in cold temperature, you should hold the throttle 1/4 way open and crank it. . .
I gotta hold mine like 1/10 open and it fires right up, even at -30.
so that's not really an issue.

How long do you let it run? I usually let mine go for 5 minutes on a semi-cold day, and 15 on a really cold day. If I went after 30 seconds like the visor says, the truck would die.

what's your idle at?
 
  #5  
Old 12-01-2013, 05:50 PM
1badeagle's Avatar
Diesel Fan
Thread Starter
Join Date: Aug 2008
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

It idles around 500 rpm once it's started. I always tap the throttle to start it up. I let it run about 10-15 minutes before I leave work. It still misses and bucks for the first mile or so. Once that's over it runs like a top.
 
  #6  
Old 12-01-2013, 06:05 PM
turbo2332's Avatar
Diesel Bomber
Join Date: Jun 2011
Location: Indiana
Posts: 2,171
Received 104 Likes on 101 Posts
Default

there is your problem. your start fuel is to low so you have to give it throttle to start and it barely runs cold because it is barley idling. bump the idle to about 750-800 in gear and your problems should be solved.
 
  #7  
Old 12-01-2013, 06:56 PM
1badeagle's Avatar
Diesel Fan
Thread Starter
Join Date: Aug 2008
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

Excellent. I will be so happy if that fixes the issue! I will have extra money for turbo and new sticks!

---AutoMerged DoublePost---

I just ran out and started it. It idles at 625rpm in Park and around 550 in drive
 

Last edited by 1badeagle; 12-01-2013 at 06:56 PM. Reason: Automerged Doublepost
  #8  
Old 12-01-2013, 07:37 PM
JBearSVT's Avatar
Diesel Bomber
Join Date: Oct 2010
Location: New England
Posts: 1,325
Likes: 0
Received 59 Likes on 58 Posts
Default

Tooooo low.
 
  #9  
Old 12-01-2013, 07:48 PM
diesel pap's Avatar
Site Sponsor - Mighty Diesel
Join Date: Dec 2008
Location: West Virginia
Posts: 4,184
Received 213 Likes on 200 Posts
Default

in cold weather 12v p pumps do better with idle being a little on the high end. timing has a lot to do with starting and mis firing.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cavnar
Diesel In Distress - Support Ticket
3
09-09-2015 07:18 PM
Mike0885
Chevy/GMC Duramax 07.5 -10 LMM
3
05-27-2015 12:07 PM
ronstop
5.9 Liter CR Dodge Cummins 03-07
0
02-26-2015 09:48 AM
custom7.3
Ford 83-94 6.9 and 7.3L General
3
11-24-2014 05:16 PM
custom7.3
Ford 83-94 6.9 and 7.3L General
1
11-23-2014 10:44 PM



Quick Reply: Cold start issue



All times are GMT -5. The time now is 04:55 AM.