12 valve HELP!!!
#2
build your transmission.... grind a plate.... tune your afc... advance timing... a lot can be done...
what is your goal, what is the truck used for, how much power are you thinking.. ??
or are you just being a 'tard and wanting just black smoke... ? then just put a plasting bag on your air filter...
what is your goal, what is the truck used for, how much power are you thinking.. ??
or are you just being a 'tard and wanting just black smoke... ? then just put a plasting bag on your air filter...
#3
#6
#8
Just do it right, grind or cut your fuel plate to a #0, slide it back or forward for more or less power, tune your AFC correctly and you will have a powerful truck that rolls coal without everyone just laughing at you for being stupid...
Don't forget, if you overfuel your truck (hence the black smoke) without gauges, you are likely going to end up cooking your motor with EGTs !
But if you really want to roll coal, seriously... put a trash bag on your air filter... no air and too much fuel = black smoke...
You could also retard your timing to 10°, and for more smoke fill your fuel tank with waste motor oil...
Don't forget, if you overfuel your truck (hence the black smoke) without gauges, you are likely going to end up cooking your motor with EGTs !
But if you really want to roll coal, seriously... put a trash bag on your air filter... no air and too much fuel = black smoke...
You could also retard your timing to 10°, and for more smoke fill your fuel tank with waste motor oil...