|
Originally Posted by Captain Call
(Post 780666)
Is it a shortbed? If it is then possibly clearance. But if I were to guess the PO is just a dumbass cause B&W engineers it's product a certain way and that's the way it should be installed.
the old saying "Its better to have it and not need it, then need it and not have it!!" |
Found something in my bed ?!?!
Before you try yanking on the ball you need to get the handle lose. I would put slight tension on it and then beat it out with a punch from the other side. Although maybe the po screwed the whole functionality of the system up when they flipped the system
|
Well i hope he didnt but its just my luck that something like that would happen....i think im more worried that i cant get the pin out mor so then getting the ball out......if the pin doesn indeed come out do you have to pull the ball up threw the bed or can you drive it down toward the ground? ?
|
Found something in my bed ?!?!
You pull it up through the bed. The bad part is you can't cut the pin because that's basically what holds the ball in
|
probably not what you want to hear,but you might have to pull the bed off. So you can access the whole hitch to get a better shot at the pin. If you know anyone with a air hammer you might try that. Good luck.:humm::argh:
|
Just a little update. im on the second can of PB Blast and the Marvel Mystery Oil didnt seem to affect it!! im trying to stay away from Heat (i.e. Blue torch) but i have all weekend off to beat on this thing ...i can get to it pretty easy wil a punch and a BFH....i dont think i can get to it with an air hammer but i CAN get to it with a small air chisel if i need to... i just hope it doesnt come down to it! ! !
Thanks for all the Ideas and info so far guys !!! |
If you havent got it out, dont try to heat it up or beat on it,,,,,Just pull the entire hitch off the truck. These are expensive hitches. It will be alot easier to get the mechanism working and the ball out if its laying on the workbench ...IMHO
|
Originally Posted by mikeshauling
(Post 782436)
If you havent got it out, dont try to heat it up or beat on it,,,,,Just pull the entire hitch off the truck. These are expensive hitches. It will be alot easier to get the mechanism working and the ball out if its laying on the workbench ...IMHO
|
It is right behind the axle.....i thought that was kind of strange myself as i thought you would want to put the weight right above the axle.....i have no idea why its like that Punch, BFH, drive the pin out, then pound the ball up. :tu: |
If and when you resort to heat, run the torch around the outside of the ball. That way, the receiver swells first, and not the ball itself. Be like sweating a gear off a shaft. You can cover the outside of where your heating with a damp rag, it'll keep from burning the paint on the bed. No longer than a minute, otherwise the ball starts to be the same temp, and you'll have to start over.
|
| All times are GMT -5. The time now is 06:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands