Originally Posted by Longhorn
(Post 491129)
Good memory bud...but sorry to say Doc was right...
I *tried* to run 37's on stock wheels and they rubbed all over the place. I had to install the Carli arms, then no issue, but I did go back to 35's, handled way better. ---AutoMerged DoublePost--- You can disagree, but you are wrong LOL...( i mean this is a nice way) ANY level kit on the market right now, will not clear 37's. BESIDE the control arm rub, you will definitely rub the stock bumper (in a big way), but the bigger issue is TRAVEL...the rears will hit the bump stop so not too big an issue unless the impact is real severe, but the fronts will tear the front fenders off if you bottom out... there is a difference between 'fitting' and working.... |
I just bought a 2012 megacab limited and want to know if I can put 35x12.5x20 on it with a 2"leveling kit? or for now would I be able to put 35s on it with stock rims? thanks for your info
|
I rub on the fenders with a 2.5" leveling kit backing up and sometimes pulling in places. I have 35-12.5"17 Kelly safari TSR's. this is with 17-9 wheels with 5" back spacing. I believe 37" tires rub some on most 6" lifts as well.
|
All times are GMT -5. The time now is 04:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands