Single wheel F-350 wanting to change
 

i have bought a used 1994 F350 with the tubro powerstroke 5 speed....it has a single wheel rearend....can someone tell me if i can change it over to dual wheels?

can someone tell me if you can make a dually from a single axle 1993 1ton F350 4door?

Yes. look up conversion kits, depends on how much you want to spend as to what kit to get. Or if you just want looks.

what im wanting to is put stock wheels and use simalators been told ill have to use spacers ...is that somehing ill have to use?

slap a Dually wheel on there and see how close it is to the spring and brake line, You want or narrow dually like the cab n chassis this could do it. Otherwise need the spacer. You putting a flatbed or regular truck bed?

it has a reaguler bed on it now and i was going to add dually fenders if that will work...

Yes, you need the spacers for the front, but the back should be fine, check around you can find a whole bed cheaper than the fenders. Arrow craft has good spacers for the front. I gave 300 for my bed. Got it painted and installed for 350. To easy like that. All them oilfield welders getting flatbeds , lots of dually beds around here.

thanks...this is the first Ford i have had and i need all the help to try and get it together....im going tuse it to pull a 28' enclosed trailer

---AutoMerged DoublePost---

thanks...this is the first Ford i have had and i need all the help to try and get it together....im going to use it to pull a 28' enclosed trailer

---AutoMerged DoublePost---

thanks...this is the first Ford i have had and i need all the help to try and get it together....im going to use it to pull a 28' enclosed trailer

Just looked at Arrowcraft and they say it needs the spacer on the rear also, they are the pro's, do it right if you going to tow with it.

ok..thanks....