So Who Drag Races Their Truck And Drives It To Work?
Curious to see who drags their truck and uses it for work, getting stuff from the store, etc? What kinda times are you running, and mods? Daily driver?
|
I drag race mine just about every time I come home. I also use it to tow my 5th wheel triple slide toy hauler. It also has daily driver duties.. As far as mods, I was running a BullyDog Triple Dog Downloader, custom CAI, 4" Turbo Back Straight Pipe, EGR Blocked, PCV Reroute, resonator deleted. I run between 8.20 and 8.80 in 2wd. Im kinda scared to run in 4wd just yet. I really need to do the HD Tie Rods and Centerlink before I run in 4wd with my new PPE Programmer. In 2wd I break traction around 9psi boost, so I do 8psi boosted launches in 2wd at the track. Hopefully with the HD Tie Rods and centerlink and this new programmer, I will be consistent Low 8's to high 7's.
Those times are 1/8th mile btw.. |
My truck sees track time about once per month for 6 months during the club racing season here in the Boise area. I also use it to haul my RV out camping. The RV tips the scales at about 13,300lbs.
Mods: 3.5" dp with 4" exhaust and a Quad 160 Xzillaraider Best ET in the 1/4 is 14.533 (2wd launches suck) http://videos.streetfire.net/video/1474-949mph-in-a-7100lbs_175164.htm |
Originally Posted by Oilfield_Mafia
(Post 202398)
I drag race mine just about every time I come home. I also use it to tow my 5th wheel triple slide toy hauler. It also has daily driver duties.. As far as mods, I was running a BullyDog Triple Dog Downloader, custom CAI, 4" Turbo Back Straight Pipe, EGR Blocked, PCV Reroute, resonator deleted. I run between 8.20 and 8.80 in 2wd. Im kinda scared to run in 4wd just yet. I really need to do the HD Tie Rods and Centerlink before I run in 4wd with my new PPE Programmer. In 2wd I break traction around 9psi boost, so I do 8psi boosted launches in 2wd at the track. Hopefully with the HD Tie Rods and centerlink and this new programmer, I will be consistent Low 8's to high 7's.
Those times are 1/8th mile btw.. you don't need the link your your application KC, the sleeves/hd tie rods and braces would be enough for your truck. You actually loose turning radius with the straight link too |
i race in mexico lol
|
I wouldnt even dare drag my 08 or pull it nothin that truck is strictly for daily driver use and for towing trailers. Thats it. My old 06 tho I ran that at Douglas and got kicked off the track after beating a vette and runnin a 11.2 quarter. My white 12v i have yet to drag race it for a time but i have street raced it and it pulls pretty hard so we will see what kind of time she runs. My black 12v that is on the razor blade edge of being legal ran a 10.41 at douglas and I think it could have been better if the clutch wouldnt have slipped so bad. Right now I'm putting a roll cage in it so I dont get kicked out of venues anymore.
|
2 Attachment(s)
Originally Posted by projectcummins
(Post 202394)
Curious to see who drags their truck and uses it for work, getting stuff from the store, etc? What kinda times are you running, and mods? Daily driver?
|
I have run mine a few times best of 15.14 edge juice with attitude, 4" turbo back, cold air intake, built tranny with billet convert and hts valve body. with the hy35 turbo... soon to come something better in the turbo department...
|
best so far here is a 14.6, dam big tires..... but I did just get my ats co pilot installed and expect better 60' times next weekend. I have been launchin a bit easier ever havin to help a buddy swap out his output shaft, I left mine stock as a weak llnk for now.
|
I drive mine to work most days and take it half way cross the country a few times a year for holidays and such. I race it whenever I get a chance and aways beat on it.
|
All times are GMT -5. The time now is 06:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands