Im usually not a visor fan at all, but I surprisingly like the way it looks on this truck.

looks like you reused old u bolts... not my thing due to them stretching like headbolts do they are 1 time use only. just putting it out there

the u bolts were meant to be re used with this kit, the bolts were fine so we went ahead and re used them, if anything comes up with them i will replace.

slick lookin' ol' short bed. Nice work. What about power plant?:tu:

OOOH.... Yes how could i forget to ask that. 350? 383? 454? Please share all the details :tu:

355 sbc right now, will soon be a 496 bbc with HOPEFULLY a twins set up or a big ol' blower peekin out a 4" cowl hood.

btw, i received some more parts for my C10 today, and bought some last night....heres what else i got.


NOS GM Chrome "Sport" rear bumper from Classic Parts for $109.95!!
Attachment 41264

Attachment 41265

Attachment 41266

Attachment 41267



Exhaust turn downs and clamps so i can dump my exhaust before the rear axle
Attachment 41268

Attachment 41269



I have a rear bumper bracket kit coming along with bumper bolts for my truck, doubt ill have them by Sat. but i should by next Mon or Tues.

Are ya keepin the hitch or ditchin it? I think a roll pan would have looked great on it, just my opinion!! What kinda go fast goodies in the 355? cam, heads, intake, compression? Or just a plain old SBC? If you cant tell im really into this build ha ha :pca1: Please keep us posted :tu:

well im glad someone is into this build - the reason i chose a chrome bumper is because this is a one off custom color that id NEVER be able to perfectly match.

Af far as motor, its got edelbrock intake, 305 heads with big valves, "3/4 race" cam, etc

---AutoMerged DoublePost---

alrighty guys, got truck buttoned up tonight, got 4 shocks on, got exhaust dumped, and took a few vids of exhaust, one before the dump, one after dump in the air and one after dump at ride height.






Let me know what you guys think of exhaust sound difference, it DEF sounded diff in person, not sure how well video will show the diff or not.

ok guys, completion of "phase I" is close to being done, i got brackets from UPS today for rear bumper and proceeded to install it. Since lic. plate frame is on back order i will have to just wire tie my plate in temporary for now. Heres some pics after i got rear bumper on!

http://img.photobucket.com/albums/v2...0/IMG_2799.jpg

Attachment 41222

http://img.photobucket.com/albums/v2...0/IMG_2795.jpg

Attachment 41223

Attachment 41224



Please let me know what you guys think of it thus far.

so one last thing i found out was that my front tires WOULD NOT work with the drop kit AT ALL. I got truck done and went to back out of my driveway, went slowly and at an angle, and my tire STILL contacted my inside lip of outer fender, ripping/cutting CHUNKS off my treaded sidewall/corner of the tire and slightly bending down the inside lip of the fender, so saturday morning i went to 3 places for a mad dash on new tires. Heres what came about.


Old Tires
Attachment 41182

Attachment 41183

Attachment 41184

Attachment 41185


New Tires
Attachment 41186

Attachment 41187

Attachment 41188

Attachment 41189

Attachment 41190

---AutoMerged DoublePost---

AND heres some pics from the show

Attachment 41191

Attachment 41192

Attachment 41193

Attachment 41194



Heres the other members of the car club that im in, we all convoyed down to the show and back, 4 cars ahead of me and myself bringing up the rear

Attachment 41195

this is one member of our club
Attachment 41196

Attachment 41197