|
I ended up doing just that an it turned out super! I would of never thought decal remover would do that...
Originally Posted by Nitelord
(Post 521682)
On the clear coat, I've used a clay bar. I found some on my wife's PT cruiser when I was cleaning it up to trade in. The clay bar took it off and I polished then waxed it.
On stainless, I'd think that the decal remover should take the highway paint off. Then hit it with some metal polish to clean up any residue. Good luck. |
Goo-Gone works really well if you can find it:argh:
|
WD40 is good for taking stuff off if used asap :tu:
|
The two best items for removing highway line paint are rubbing alcohol in the highest concentration you can find(I use 90% when I detail) and a product made by Stoner called "Tarminator".
If you use the rubbing alcohol use cotton to soften the paint and a soft terry towel or micro-fiber towel to remove the paint when its loose.If the line paint is not that bad and you use the Tarminator use the same care and towels so you do not scratch the clear coat. Either way will work and have been used by many shops that detail.I just did a customers Benz that he had the yellow paint all over it and up on the body as well. |
seen my buddy use thinner.. works pretty good..
|
| All times are GMT -5. The time now is 12:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands