My Cummins
 

Well to me. This is my second truck. Im 16 and bought this truck for $1900. I original bought a 1975 GMC Seirra K-15 4x4 for $850 last year and that was going to be my DD, but started building it up over summer and went to big and can't afford to drive it DD, so its a mud truck now, sence I got the cummins.

Here's the only picture's I have right now:

http://inlinethumb55.webshots.com/44...600x600Q85.jpg

http://inlinethumb43.webshots.com/32...600x600Q85.jpg

Here's the plans:
New front rotors/hubs/pads
Work on rear drum brakes
Bleed brakes
New fuel filter
Change oil/oil filter
Sand down and paint
New tires/wheels
-Guague piller(Gauge Works Dual Gauge Pod)
-4" Exhuast(Rapid Flow Single Exhaust System)
-Cold air intake(PDR Diesel Performance: ASA Modifieds 1st Gen Dodge Cold Air Intake System 1989-93 only /w aFe Filter)
-60HP Injectors(not for awhile)(Scheid Diesel - 89-93 Dodge Injector 60HP Increase Injectors Scheid Diesel Ram 2500 - 3500)
-Fuel pin
-3200 Spring
Oh and some turns on the fuel screw(heard that adds some power)

Just looking for alittle more performance/towing and some black smoke

Here's the mud truck the deisel will tow

http://inlinethumb44.webshots.com/14...600x600Q85.jpg

Tractor tires to come!

What's done so far:
Oil change/oil filter
New front rotors, pads, upper ball joints and bushing's on drivers side
Replaced tranny hose for 2nd tranny cooler with havy duty hydrulic hose
fixed leak on right rear tire
put TSC tool box in

To come in next week or 2

-double gauge pillar
(Auto Meter 15198 - Auto Meter Pillar Gauge Pods)

-0-1600 EG gauge (Dynomite Diesel - 0-1600 Degree White Face EGT Gauge Gauges Danin ALL UNIVERSAL)

-0-60lb boost gauge (Dynomite Diesel - 0-60lb White Face Boost Gauge Gauges Danin ALL UNIVERSAL)

-upgrade H1 compressor housing and 60mm wheel (Upgrade Compressor Housing & Wheel combo (60mm inducer) for 1991.5-1994 Turbochargers)

4" straight pipe

Good looking trucks!

cool, what all over the ext cab part of the cab under the window behind the drivers door?

1st gen's are my favorite...lookin good bro keep it up!:c:

Thanks

---AutoMerged DoublePost---

The guy before the guy I bought it from use to buy house's so that's what it pretty much say's on the side. Need to sand it downa nd get it painted.

---AutoMerged DoublePost---

Thanks hopefully by this summer/summer she'll be looking good with some good power.

It dont take much to make the power with these trucks!

Ya can't wait to start working on the motor

my brother has a fuel pin and banks intercooler all the pipeing to sell. i dont know how much if ur interested pm me back

I dont see pics of the first gen. Nice 75 though!

Be careful buying your parts from 4wheelparts

Got my gauges yesterday, hopefully pillars will be here today, then taking the cummins down tomm. morning to get driver windsheild wiper fixed, turn signals and brake lights, gagues wired up and pillars installed.

---AutoMerged DoublePost---

Got my air fixed and steering fixed(u-joint welded on to steering box and the steering shaft weled to joint) last thursday. Then this past friday got my alpine radio friday and got it hooked up with help of my buddies, thinking maybe get a amp and a 10 or 12 sub installed in the back in the middle so there's still leg room for pass. don't need nothing crazy, listen to mostly country.

Gauges and pillar's

http://inlinethumb04.webshots.com/39...600x600Q85.jpg

http://inlinethumb22.webshots.com/43...600x600Q85.jpg

coo, is it me or does it look like those gauges look harder to read than the newer gen. trucks?

X2 :fu:4wheelparts:gunner:

That's not at ride height picture. The only one that's kinda hrd to read is the top but its not really that bad.

X3! ordered a new pitman arm for my 98 and they sent me the wrong one 4 times!!!

i've had good luck with them, got everthing correct so far.

Got new tires on and cleaned the wheels up real good like today.

Next is a new nut for driver's rear axle(where to get one???), put new pads on, replace TPS sensor, and get new bumpers and seats and she'll be set for more motor/tranny mods.

Here's for comparsion for when I first got her: You can see the stickers(got them pealed off), how far the exhuast stick's out and the angle, and it had 285/75/16 in the back and 265/75/16 up front. The new tires are 245/75/16 10ply Load range E tires. Next is to be painted Hemi Orange.

http://inlinethumb01.webshots.com/45...600x600Q85.jpg



http://inlinethumb06.webshots.com/44...600x600Q85.jpg

http://inlinethumb14.webshots.com/41...600x600Q85.jpg

http://inlinethumb40.webshots.com/41...600x600Q85.jpg

http://inlinethumb01.webshots.com/12...600x600Q85.jpg

http://inlinethumb22.webshots.com/30...600x600Q85.jpg

http://inlinethumb34.webshots.com/30...600x600Q85.jpg

http://inlinethumb27.webshots.com/38...600x600Q85.jpg

Here's for better comparison

http://inlinethumb01.webshots.com/45...600x600Q85.jpg

6/19/09

http://inlinethumb41.webshots.com/12...600x600Q85.jpg

http://inlinethumb50.webshots.com/45...600x600Q85.jpg