First Gen Cummins Project
#1
#2
#3
Cleaning up the cab
Boy was it a mess in the cab. Doors had been leaking for a long time and i could tell the carpet was damp but when i pulled it out it was worse than what i was expecting. Nevertheless I ended up cutting the floor out and patching it up . Cant say Im too pleased with the outcome but it was my first attempt at something like this . I will probably end up redoing it or finding another cab but more on that later
#5
New fender and tires
Front fender was rusted pretty bad on the bottom so i ended up changing it for an aftermarket fender. (questionable fit and quality) Also tested a tire from a friend but really didnt like the style so i kept looking around for something else.
Last edited by RustyPanda; 01-29-2018 at 09:57 PM.
#6
Cleaning up the exterior
Took off the trim as a lot of it was basically falling it off already . The box is actually not the original but it is a factory replacement . the trim by the wheel well had come loose and had filled with mud causing the only actual rust area on it, which was too bad . Like a responsible truck enthusiast I bought some rims and tires before addressing any mechanical issues. Also ended up taking the windshield out as it was cracked and there was water and mildew between the layers of glass.
#7
#8
Small things.
For most of the summer I left it like that looked around for small things like side markers and taillights. Tried installing a windshield myself and broke it it . Oops. Also made a stack for the bed and did the free pump mods.Did some cleaning and tried to hunt down some small electrical issues.