i am confident that the frame will hold it. i have a piece of 1" X 3" flat that goes into the frame and bolts down to where the tow hooks were. then that is welded to a piece of 7" X 3/8" flat that goes across the frame. i'll put a picure of the mounts on here so you have a better idea.
|
looks like it belongs on the front of a locomotive. ain`t a bad thing ever try stopping a train!?
|
not kidding here guys, i work in the oil field and at the shop we had a water truck come in that needed some work on the pump. my bumper is bigger!! hell this thing is almost as big as the bumpers on the gin trucks.
|
Its fabed up really nice. you do good work. I just think it is a bit to long. But I bet it makes a hell of a work platform. It still looks way better than the stock crap.
|
looks good but i would probably want some thing to go around the head lights make i took more complete
|
psd blackcloud. thank you. well it wasn't entirely planned to stick out that far. when i was breaking out the plates between the frame and square tube i made them a little to long. but for being my first one i think it turned out very well. if i were to do it again i would change a few things. it looks alot bigger than it really is because of the space on the sides in front of the head lights. but this is more of a "oil field" style.
|
You weld on pipe line?
|
no. i work in the oil patch though. if you look at winch trucks they have this same style bumper. and i thinks it looks bad ass.
|
I didnt even think about that. But it is the same style.
|
that's what i based it off of. and this is very close to one of the gin trucks at the shop.
|
All times are GMT -5. The time now is 07:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands