ian also explain your procedure please i have about 90 lights i want to do
|
I did mine the same way as Ian!
first sand the housings then clean with a grease and wax remover wash off and allow to dry apply adhesive promoter then spray with niteshades in very very light coats to desired color wait a few minutes and apply clear, or wait 24hrs and sand with 1000-1500grit, and polish then apply the clear coat! the niteshades works well, but it will crack if you apply it too fast, so apply very slowly in several very light coats! I am happy with mine, but every now and then they look brown in very bright sun! |
4 Attachment(s)
Originally Posted by mudn_1
(Post 341700)
I did mine the same way as Ian!
first sand the housings then clean with a grease and wax remover wash off and allow to dry apply adhesive promoter then spray with niteshades in very very light coats to desired color wait a few minutes and apply clear, or wait 24hrs and sand with 1000-1500grit, and polish then apply the clear coat! the niteshades works well, but it will crack if you apply it too fast, so apply very slowly in several very light coats! I am happy with mine, but every now and then they look brown in very bright sun! Attachment 52265 Attachment 52266 Attachment 52267 Attachment 52268 :U: |
wats the adhesive promotor?
|
All times are GMT -5. The time now is 11:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands