Lets See 'Em
 

you know what you like to get out there and get dirty with1!!!!

heres mine:
95 jeep wrangler yj.
full custom halo cage, front bumper, crossmember, traction bar, rockers built by me and a buddy
more full suspension racing seats/with g force 5 point harnesses.
raingler puppy nets
bedliner interier
dana 44 rear 4.88 gear detroit
dana 30 front 4.88 gear aussie locker
york oba with 2.5 gallon tank with air horns
custom cj-7 front end conversion with tube fenders... (not as easy as i thought it was going to be lol)

2.5 mpfi motor lots of pefomance mods (no i dont have a lead foot syndrome to get going all the time)
ax5 5 speed transmission

np231 transfer case with oversized chain with sye
cv driveshafts f/r
lots of other stuff i cant remember

Attachment 61448
Attachment 61449
Attachment 61450

Well,
 

Here is my Yamaha recovery system!

http://i135.photobucket.com/albums/q...r/P2070365.jpg

nice work mobs!! that cj clip is killin'!! was gonna do that to my '94 before i had to let her go. i'll have to get some pics of my junk up 2morrow.

Wel my toy isn't as nice as Mobs but its still fun to play with! :D

http://i143.photobucket.com/albums/r...rthepuddle.jpg

"Don't look at the tires!!! :eek: "
http://i143.photobucket.com/albums/r...eworsemess.jpg

Mikey....is that your new girlfriend???




LOL...sorry man, just had to.....:D

Wize Arse... No its a friends wife... She wanted a picture of us playing in the mud... Well she got the mud all right... :eek: I still to this day laugh about it.

Sad but true they moved to Northern Idaho... I've got no one to go mudding with... :(

nice flat fender mike. done up just like a flattie should be, simple and effective.

Hey, theres no shame in liking dirty older gals....:p :D



You probably have some real nice spots to wheel in your neck of the woods....

haha mike likes em dirty LOL

Here is my 89 YJ the day i bought it, it had a blown 2.5l . I swapped a 93 grand cherokee 4.0l and a YJ ax15 into it. I have since put a 4 inch lift and 33/12.50 Baja Claws on it aswell. I will post some finished pictures later.


Attachment 61441

Attachment 61442

Attachment 61443

Steve

Attachment 61426
15 minutes before I broke the transmission in half

i think your jeep and my jeep are buddies..hahaha ive blown lockers, motors, transmissions etc.. damn jeep and there weak shit.. lukily theres not much daimlar chrylser left on my jeep.

Here's one from the Old Day's.

That truck is sweet. You guys got me wanting to get something to off road with now.

i can help you with that :c:

that's a sweet ride. ever wish ya still had it? i miss most o my old stuff.

got enough shocks?
:lol: :lol: :lol:

That is a sweet setup you have, but I want something to drive on the street too.

you can drive it on the street. passes inspections and has plates :)

i drive it around all the time.

i tow it to wheel it in case i break it

plus the dodge is more comfortable..



next excuse? lol

hey mobs I don't think those four squirrels you got count as a motor.

yah they do.. i pissed them off.

i have 4 very angry squirrelss.

lol

I hear you, The more I do to make it better I find the next week point. I now Have 2 expensive habbits:)

i am in the middle of project anger management. it is a 1986 chevy shortbed stepside. with 20 inches of lift a mild 350 , th400 , np200 , 2.5 ton rockwells. and as for tires i really want 48x25x20 V treads but i will probally get a set of 44 in boggers and cut em or 53 inch michelins cause there cheap... here is a pic of the truck before i cut it up to build what i have now
Attachment 61363

http://jeeperz.tenmagazines.com/gallery/doug/87332.jpg
http://jeeperz.tenmagazines.com/gallery/doug/87333.jpg

Here's mine...2004 Rubicon. Minimal lift, 33" MTRs,

i got a 4x4 subaru justy,goes through the woods perdy good 5spd with 3 cylanders of fury

here's my 90 chevy, in the pics it had a soild axle swap that i done myself with 52" 3/4ton rear springs up front and a shackle flip in the rear. axles were 10bolt/14bolt with 4.10s and a welded rear. i also swapin in a th400 tranny and np203 tcase and i was running 39.5" swamper iroks

in the last pic you can see the new axles, 2 steering 2.5ton rockwells, and i dont have any pics but the new tires are 44x18.50 ground hawgs. the frame from the cab back is gettin cut off and rebuilt/shortened/narrowed to make room for the rear steer and i'm moving the axle forward 11" to shorten up the wheelbase and going to coil springs from a xj and a graderball rear suspension. i am also dovetailing the bed down to a stepside tailgate width. up front i'm swaping in 56" chevy 1ton rear springs, moving the axle forward 4", and narrowing the front clip all the way to the inside of the headlights and droping the front edge of the hood a bit so i can see better. it is also getting a full interior cage this time around

Nice to see a couple jeepers here... Here is my junk... 89 yj wrangler on 35s with too much money invested to count LOL...
Attachment 61246

Scott

heres my cheap wheeler costed me less than 500. still want to swap in solid axle and 350 and some 35" boggers.

http://i30.photobucket.com/albums/c3...n/HPIM4576.jpg
http://i30.photobucket.com/albums/c3...n/HPIM0816.jpg

Thank's, It was alot of fun back then, but I dont miss it much, just once in awhile.

still not done but getting closer.
1985 toyota sr5
4.3 vortec
4l60e dual yota cases
Electric locker in front
and the list goes on
Attachment 61152Attachment 61153Attachment 61154

Thats BAD ASS !!!

Attachment 61147
:sen:

Think I just peed a little....

HAHAHAHAHAHAHA LOL HAHAHAHlol

here is mine, has a 68 383 punched to 441 in it with a 4 speed tranny

thanks , heres a front end shot. Still not done putting in headlights and building some type of grill and adding a winch. I'm going to mod some stock fenders and basically cut them down to nothing to fill in the gap between the hood and tubing.As of now it also has a bolt in tie bar that connects both shock hoops together as well:j: Attachment 61128 If theres any interest i might throw on a build up thread of it,

yes def throw up a build thread
does the tie in bar go above the hood? wont that make it hard for trail repairs, i know its only a couple bolts, but what about incase of a fire?

here is mine
there is a thread a post down
Attachment 61126

Function over fashion. Theres shouldn't be to many trail repairs considering it has 30k on the motor. I would rather spend the time removing the bolts then trying to fix it when a rock smashes my hood into my motor or even worse, destroy the throttle body.:j:

Id love to see a build thread heathen....Im sure others would as well...

may not be a 4x4 but I am off road. this is my supermodified garden tractor I'v got a 1915 vw motor in it. we pull these in a 1100# class 1300# class and sometimes a 1500# class. our sled weights 6300# summer fun that I do with my dad he's got one too.