Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Ford Powerstroke 99-03 7.3L (https://www.dieselbombers.com/ford-powerstroke-99-03-7-3l/)
-   -   crank but no start (https://www.dieselbombers.com/ford-powerstroke-99-03-7-3l/90353-crank-but-no-start.html)

Pollackz 01-27-2012 07:48 PM

crank but no start
 
My trucks been down for around 2 months now finally got sick of having to walk every where so I'm determined to get it running this month. I took it out to play in the woods and on my way back it died at a stop sign and I had to get it towed back to post. I Tryed changing the CPS and nothing so I waited till payday and bout autoenginuity. Ran a buzz test and all sounded close to the same. So I start looking at codes needless to say I think my check engine light is burnt out lol. Main ones I pulled are P1280 ICE sensor circuit low. P0603 Idm KAM ERROR (i unplugged batterys earlier) and P0470 Exhaust Pressure sensor (Provavly clogged)

Could P1280 ICE sensor circuit low be what's stopping my truck from running? I pulled what I think is the ICE sensor and the plug is full of oil

Any help is appreciated

CSIPSD 01-29-2012 10:11 AM

While watching your computer look at your ICP pressure and IPR duty cycle.

Report back.

95powersmoker 01-29-2012 08:23 PM

Does the truck start and run now? Or just cranks? Watch your ICP and DC% while cranking if it doesn't run.

Pollackz 02-01-2012 01:43 PM

I will asap. I have to finish this 24hour guard duty hopefully I will have enough energy to test it before I go to sleep tomorrow. I have the battery's on charger right now. Accidently left key on to long when I was playing with AE

---AutoMerged DoublePost---

ICP pressure 0 duty cycle 64.84

---AutoMerged DoublePost---

If it masters ICP Volts is. 20

95powersmoker 02-01-2012 02:14 PM

While cranking ICP is zero? You have a HPO issue. You need at least 500psi ICP to start the truck...

Pollackz 02-01-2012 02:23 PM

Could the ICP sensor cause it to not build pressure?

95powersmoker 02-01-2012 02:48 PM

Unplug it and try to start it...

Check your HPOP res as well...

Pollackz 02-01-2012 03:03 PM

Unplugged still nothing. Gotta get tools back from friend before I can check hpop Res. What do I need to check hpop Res?

95powersmoker 02-01-2012 03:08 PM

Allen wrench to get the plug out and something to stick in to check the level.

Pollackz 02-01-2012 03:19 PM

If it is low do I just top it off?


All times are GMT -5. The time now is 10:37 PM.


© 2024 MH Sub I, LLC dba Internet Brands