boost seems low to me???
Damn lol I'll do it at a friends then how much pressure? 20?
|
20 psi should work fine.
|
ok and i tire valve stem thing will work fine for air in?
|
Yes, a tire valve stem.
Here's what I've made before. How To: Boost leak tester for $5.02 - evolutionm.net |
boost seems low to me???
3 Attachment(s)
I got some pics I'm going to be putting up.
Looks like it could have an up pipe leak but there's not that much black on the pipe. ---AutoMerged DoublePost--- here a pic of the top of the up pipe on drivers side one of them ill take more pics tm. I'm also going to wipe off the soot where it is on the pipes drive around a little and see if it comes back Attachment 41971 here a pic of a motor thing jw what it is and its purpose. its on the passenger side between the battery and ac stuff. thanks! Attachment 41972 Attachment 41973 |
The motor you pictured is the Vacumm pump for the AC/Defrost vents and the hubs if you have shift on the fly.
The up pipes are leaking a bit, I doubt that is all your issue, but its a good start. |
boost seems low to me???
Ok thank u and thank u! I will be looking at more and getting more pics tonight
|
boost seems low to me???
I got the S&B on tonight so now boost is up to 18.5 so leak somewhere still could the waste gate just be set low?
|
boost seems low to me???
Ok so I'm up to 18-19 psi now had a friend power break it and sprayed boots couldn't find anything boots seemed to get hard can't find any pipe leaks other then the one I post the pic of could it be the waste gate? If so how do I check that and fix it?
|
Try unpluging the wastegate and see, but I doubt that is your issue. Need to fix the up pipes, your loosing some there.
|
All times are GMT -5. The time now is 09:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands