Oil Filter?
 

I bought the Fleetgaurd LF 3774 and this thing is huge will it realy fit?

anyone correct me if i'm wrong but for fleetguard oil filters, I thought 7.3 liter standard filters was a LF3630, and for the stratapore version its LF3974, cross references off a Napa gold 1734, I know there's an even bigger application filter, but I thought it was for like heavy equipment, I just typed in off the fleetguard website for LF3774 and got no results for that filter. How did you come about that filter cowboy?

I ment LF 3374

---AutoMerged DoublePost---

its about 5.25'' in diameter. and it looks like it wont it fit.

copy that, I think that's just the bigger version of a LF 3974. as long as the threads are the same, and the gasket sealing surface is the same diameter, and you must have some prior info to have had even ordered that filter. But my info is limited as I have no experience with that exact filter, it looks like a whole lotta filter but I would still say go for it. pick-up a NAPA one as a back-up if your still not sure.

I got the number from a filter cross referance sheet under the tech files at the top of this forum.
We will find out tonight if it fits

If its the one that tapers a bit it will fit. I ran one for 2 or 3 oil changes then just went back to the factory size. It does allow about 1.5 extra qts of oil!

well the filter didnt fit it was a luber finer the guy claimed it was a cross number. i will get the part number tomorro

damn, sorry to here that, thought that would work too.

They have one just like it that fits... It hit the oil pan correct? The one that fits necks down about 1/2" about half way down the filter... I ran one for 4-5 oil changes...

I got the wrong one too the first time.

Yes it hit the oil pan