I was banned from the dieselstop today for ragging on mexican Illegals :( I don't care I changed my IP address and mac address and reregistered in under 2 mins after the bann so who cares never got much help just alot of vendors pushing stuff anyway...

guages PYRO/TRANNY/BOOST OIL TEMP/OIL PRESSURE LUBE/WATER TEMP
water runs 180 oil runs 190 tranny 140 to 155 depending on guage or AE scan
PYRO 900ish right now max since I fixed wastegate was lower Boost hanging in 22-23 psi now oil pressure 18 lbs at idle to 60 psi max



Buzz Test Passed 3.2-3.3 ohms all 8 injectors and wiring from cover to solenoids on injectors check out....
They pass a buzz test with flying colors

Ford 7.3L Lube Pumps

Guess what I bought and put in my truck truck when I was looking at part #s to check my local ford parts place I looked at the wrong one :( I have a brand new pump for a 97-98 powerstroke ..grrrrr I should be able to sell it :( if they won't take it back~!

I guess I want 3000 psi so I can remove HPOP completely from my equation...The O-scope will show IDM output so i can see if voltages are on par at least both PCM and IDM are pretty expensive ....

97/98 FORD 7.3L POWERSTROKE ENGINES. THE FORD PART#F81Z9A543AA. THESE WERE
MANUFACTURED BY REX ROTH AND ARE NEW, NEW, IN PRODUCTION RACKS.
Search All World Automotive Surplus Auto Parts B2B Trade Network at pins on valve cover


Thanks for the help
I get in a rush sometimes due to not having a shop and a family to support and this thing has taken way too much of my time and money major purchaser regret but I loved her when she ran good been years since that was ...

Good the org and stop are both run by nerds lol

ok I like to bash and use profanity along with some rascism :)

---AutoMerged DoublePost---

humm howdy yall