Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Ford Powerstroke 99-03 7.3L (https://www.dieselbombers.com/ford-powerstroke-99-03-7-3l/)
-   -   fuel pump ? (https://www.dieselbombers.com/ford-powerstroke-99-03-7-3l/55610-fuel-pump.html)

dirty balz 07-31-2010 05:56 PM

fuel pump ?
 
so i just got my chip back from being re burned at beans, hook it up truck fires right up sounds good, leave it running while i go to put the pedal spring back on my clutch pedal and then truck shuts off like it was turned off at the ignition but it wasnt, i open fuel drain valve on top and nothing comes out. can a fuel pump just crap the bed just like that or is there something else i should be looking for?

joebob3093 07-31-2010 06:27 PM

im running a SD pump on mine an it will cut out at random. i have to get out and kick it and it will start running again. i think there is a short some where in mine.

moose99ps 08-01-2010 12:58 AM

yes thes pumps can just stop running at any moment.. it wont start at all? even cold? i had a pcm take a shit on me and it would overheat the fuel pump relay and shut the truck down wait and let it cool off and itd fire back up..

dirty balz 08-01-2010 01:14 AM

nah even after being cool for 5 plus hours it wont fire.

CSIPSD 08-02-2010 11:12 AM

Check your fuel bowl heater fuse... Bet you find it blown...

dirty balz 08-02-2010 06:02 PM

where is that fuse? and if i win the bet do i get your truck ?:bat:

---AutoMerged DoublePost---

ok well i just checked the fuel bowl again i left it open for 10 seconds and it started coming out so i guess it isnt my pump. so what to look for next?

CSIPSD 08-02-2010 06:21 PM

Do you have a WTS light and SES light come on when you turn the key on?

It could be the CPS... Simple and it fits the issue... RPM gauge move when you crank it?

dirty balz 08-03-2010 04:09 PM

it bumps up to about 200

---AutoMerged DoublePost---

well i pulled my beans chip out and she fired right up now iam waiting for beans to call me back

CSIPSD 08-03-2010 05:11 PM

Hummmm... It ran, then didnt... Pull the chip and it runs.

Do you have a no start setting on the chip?

Did you have a chip before? Contacts clean and everything?

dirty balz 08-03-2010 07:41 PM

yea i had a ts, sent it to beans to get re burnt and it does not have a no start option, now im waiting to hear back from them


All times are GMT -5. The time now is 07:12 PM.


© 2024 MH Sub I, LLC dba Internet Brands