Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Ford Powerstroke 99-03 7.3L (https://www.dieselbombers.com/ford-powerstroke-99-03-7-3l/)
-   -   2003 7.3 Start Issue please Help (https://www.dieselbombers.com/ford-powerstroke-99-03-7-3l/112079-2003-7-3-start-issue-please-help.html)

Neil26 05-10-2013 02:00 AM

2003 7.3 Start Issue please Help
 
A friend of mine has a 2003 7.3 and it has been running perfectly fine. He was backing a trailer and didn't see the tree and well you can guess the rest. He hit it so hard it bent his draw-tite hitch, he pulled up off the tree and then turned his truck off. We looked over the bent bumper etc. and he attempted to crank the truck with no luck. I thought at first it was the fuel shut off switch on the passenger kick panel but not it. Checked fuses and none are blown, all dash lights are coming on and fuel pump is working and pumping hard. Anyone heard of this happening? Maybe some wires got knocked loose? Why wouldn't it have died before he turned it off then?

When ether is sprayed into the intake it cranks up..so it's simply not getting fuel for whatever reason. Maybe i missed a fuse? (even though i checked 3 times)

Any help would be awesome..needs to be fixed asap

Texas Chain Ring 05-10-2013 10:59 AM

did you drain the fuel bowl and then turn the key on to see if it fills up?

Neil26 05-10-2013 11:16 AM


Originally Posted by Texas Chain Ring (Post 1006917)
did you drain the fuel bowl and then turn the key on to see if it fills up?

yep sure did pumping hard

Texas Chain Ring 05-10-2013 10:24 PM


Originally Posted by Neil26 (Post 1006918)
yep sure did pumping hard

well, that's about as far as my knowledge goes. Sorry. at least we know fuel is getting to the motor, now it's just a question of why isn't it firing. Try the under cover valve harness, Try the cps, It's something simple, obviously, just please let us know what it turns out to be once you figure it out. Is it just clicking under the passenger side hood? electrical connection perhaps, knocked something loose perhaps on the starter? jump the terminals at the solenoid..?? power there or not?

I'm sorry I can't be of more help, I'm new too. Good luck.

Neil26 05-10-2013 10:35 PM


Originally Posted by Texas Chain Ring (Post 1007003)
well, that's about as far as my knowledge goes. Sorry. at least we know fuel is getting to the motor, now it's just a question of why isn't it firing. Try the under cover valve harness, Try the cps, It's something simple, obviously, just please let us know what it turns out to be once you figure it out. Is it just clicking under the passenger side hood? electrical connection perhaps, knocked something loose perhaps on the starter? jump the terminals at the solenoid..?? power there or not?

I'm sorry I can't be of more help, I'm new too. Good luck.

It's turning over and it's turning over at a really good rate so batts are good as is starter..it's just not getting fuel into the cylinders. I just finished up fixing my dodges front end today (again) so i will be able to look at it more tmrw. Even if you're new two minds are better than one. Thanks for the help! :)

Texas Chain Ring 05-11-2013 02:23 AM


Originally Posted by Neil26 (Post 1007006)
It's turning over and it's turning over at a really good rate so batts are good as is starter..it's just not getting fuel into the cylinders. I just finished up fixing my dodges front end today (again) so i will be able to look at it more tmrw. Even if you're new two minds are better than one. Thanks for the help! :)

Injection control module, try that.

Neil26 05-12-2013 08:05 PM


Originally Posted by Texas Chain Ring (Post 1007038)
Injection control module, try that.

Done, rechecked all fuses all good. Thinking maybe it's the cps. Hate to get one and not be it, but gotta do what you gotta do.

POWER-STRUCK 05-12-2013 08:19 PM

any chance that it has a chip and the impact knocked it loose?

Neil26 05-13-2013 06:27 PM


Originally Posted by POWER-STRUCK (Post 1007218)
any chance that it has a chip and the impact knocked it loose?

i pretty positive that it doesn't. Will see when he buys the sensor

---AutoMerged DoublePost---


Originally Posted by Neil26 (Post 1007395)
i pretty positive that it doesn't. Will see when he buys the sensor

New cps bought and installed to no avail. He knows someone with a scanner to look and see if it's putting up any codes. When he gets it fixed i will post the problem for someone else future reference :)


All times are GMT -5. The time now is 12:56 PM.


© 2024 MH Sub I, LLC dba Internet Brands