Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Ford Powerstroke 99-03 7.3L (https://www.dieselbombers.com/ford-powerstroke-99-03-7-3l/)
-   -   Diesel low power (https://www.dieselbombers.com/ford-powerstroke-99-03-7-3l/107435-diesel-low-power.html)

Scott Hart 01-05-2013 11:50 AM

Diesel low power
 
My 01 250 won't run faster than idle. When in try to drive it has no power and smokes a lot .
I changed the fuel filter started it and let it warm up and no change. Checked all fluids and there good. Think maybe its bad fuel? Or turbo,sensors, ??? :s:

95powersmoker 01-05-2013 12:17 PM

Gonna need a lot more information... how many miles, did it just recently happen, how long have you had the truck...etc...

Scott Hart 01-05-2013 12:30 PM

Had the truck about six months but bought it from work where it's been for six years. It's always been serviced well and driven daily until I got it. It's got 275k miles on it. What else do you need to know?

Stroker815 01-05-2013 05:06 PM

Make sure your MAP sensor hose aint unplugged. Sometimes they blow off and will cause it to lose power and dump black smoke

Scott Hart 01-05-2013 05:29 PM

Thanks. I'll look at that. How can I get the codes from it ( if possible ). I don't have a scanner.:argh:

tiremann9669 01-05-2013 05:32 PM

Auto Zone or Advance Auto will scan it for you :c:

Scott Hart 01-05-2013 05:35 PM

Gee I never thought of that. IT WON'T MAKE IT THERE !

95powersmoker 01-05-2013 05:43 PM

To retrieve codes, you will need a scanner that works with powerstrokes... Autoenginuity is the one I use...

A/Ox4 01-08-2013 12:15 AM


Originally Posted by 95powersmoker (Post 977291)
To retrieve codes, you will need a scanner that works with powerstrokes... Autoenginuity is the one I use...

To pull every code you will need a special scanner. But a lot can can be pulled with a non specialty scanner. I have pulled all kinds of codes with a $50 scanner from Autozone. If the check engine light is on, there is a code that can be pulled with a generic scanner. If it is NOT on, there may still be proprietary codes lurking that need a specialty scanner.


All times are GMT -5. The time now is 05:48 AM.


© 2024 MH Sub I, LLC dba Internet Brands