Down pipe problem
I finally got around to installing my Down pipe on, and I am having a really bad rubbing noise/vibration when stopping (below 15mph) and at idle. It's driving me crazy. Idk if it is because i didn't cut enough room for the down pipe or what. Maybe it's rubbing on the cab to much. i was just seeing if anyone else has a solution or an answer. Thanks
|
yeah get a bar and push the DP in every direction you can to kinda re shape it. that's what i did lol
|
Even after it's installed?
|
yep. or deal with it and eventually it will stopp rubbing. how big is the DP?
|
Just the two peice MBRP 3 inch
|
huh. i know i had on on my 96 that was 3" then to 3 1/2" half way down, then 4" at the bottom and it was a rubbing SOB. then my 94 i had just a 2 piece 3". not sure whose it was.
|
And the 3 in rubbed?
|
no it didn't. it was actually loose where the two prts met. so i think that helped
|
Huh, well ill beat it around
|
you'll just have to screw with it.
|
Take the pipe back out and go get yourself a portapower... Don't just let it rub, it will rub a hole in your dp and then all this was a waste.
|
Pull out a pry bar and start beating in your firewall.
|
Well i drove it around for the last couple of days and it seems to be getting better. Before when it was really bad i couldn't budge the thing at all by hand and now it has a little wiggle. should i still worry about it because it might get a little better
|
Well it's probably not fixing itself... it's probably making something else all fubar'd
|
well on my 96 it rubbed. then in about a week it stopped making noise.
|
I've had it now for about a week and it hardly rubs at all now so i'm gonna let it sit for a while and then pull it apart and take a look see at what it's done
|
lol...
|
I can tell you from experience what mine has done... wrecked a trans cooler line because I said ah, it's fine, no worries... ya until my truck is pissin trans fluid everywhere...
Just make sure it's clear of everything otherwise it will cost you later... Like I said before, take it out, get a portapower and make the room for it... |
All times are GMT -5. The time now is 09:08 PM. |
© 2024 MH Sub I, LLC dba Internet Brands