Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Ford Powerstroke 94-98 7.3L (https://www.dieselbombers.com/ford-powerstroke-94-98-7-3l/)
-   -   question about a ts 6 postion. (https://www.dieselbombers.com/ford-powerstroke-94-98-7-3l/64883-question-about-ts-6-postion.html)

powerstrokin_97 12-14-2010 07:43 PM

question about a ts 6 postion.
 
Hello, I have a 1997 powerstroke and i was wondering about getting custom tunes on the chip, would i be able to get it re tuned with tunes already being on it? and has anyone ever heard of having 2 ts 6 postions in a truck? becuase a freind of mine has 2 in his and i was wondering what kind of diffrence it would make, thanks in advance.

OceanDiesel 12-19-2010 07:20 PM

Not sure about having 2 at the same time, but you can get a chip reburned easily.

fordornothing 12-19-2010 07:45 PM

i don't think you can run two. the "port" on the pcm is only big enough for 1

powerstrokin_97 12-20-2010 02:37 PM

i know he has both of them hooked up i just dont see how. if you start to turn the second one up the rmp keeps going down and down. and when there both on 6 it lopes really hard.

PHPDiesel 12-20-2010 05:20 PM


Originally Posted by powerstrokin_97 (Post 671278)
i know he has both of them hooked up i just dont see how. if you start to turn the second one up the rmp keeps going down and down. and when there both on 6 it lopes really hard.

He does not have two "chips" hooked up. Not possible.

It IS possible that he may have some sort of variable resistance injection control pressure fooler installed which will definitely cause a rough idle once the resistance is low or high enough (depending on whether it's wired in series or parallel) to cause the ICP to go through the roof at idle.

But as for having two "chips".....

Not gonna happen.

One "chip" on a stock 1995-1997 Powerstroke will barely amount to anything. Even if there were a way to install TWO of them, you would still be making 60-70 HP above stock - maximum.

Yes, there are many vendors who are able to reburn your existing chip with their tunes.

95-SimpsonOBS 12-20-2010 06:25 PM

you can send a chip into someone and have new tunes burned onto it even if it has existing tunes.
Cody from PHPDiesel, "variable resistance injection control pressure fooler"- what is this and what does it do????

PHPDiesel 12-20-2010 06:30 PM

You've heard of these.....

10K mod
Edge Juice
Dr. Performance Workhorse
or
Any of the $30 *cough* chips *cough* on ebay (that technically aren't "chips"), but a resistor in a box.

powerstrokin_97 12-20-2010 07:00 PM

thanks alot. and were would be a good place to have my chip reburned at?

95-SimpsonOBS 12-21-2010 09:58 PM


Originally Posted by powerstrokin_97 (Post 671450)
thanks alot. and were would be a good place to have my chip reburned at?

i have tony wildman tunes and im impressed with them. i only have a TS with generic tunes on my dads truck to compare it too, but i really like my TW. i didnt do any research into custom tunes before i got mine i just got what my buddy told me too. talking around ive heard PHP makes damn good custom tunes.


All times are GMT -5. The time now is 01:32 PM.


© 2024 MH Sub I, LLC dba Internet Brands