crank, no start
I have a 95 powerstroke. I just replaced the headgaskets & injector sleeves due to them leaking. before I did, the truck ran great. now two weeks later I still can not start the truck. it will crank over great just will not start. I replaced the IPR valve, the GPR, starter. The valve cover gaskets & glow plugs are 1 yr old. the lift pump is 1 yr old. the injectors got all new o-rings. I am lost, any help would be great.
|
Double-check all the wiring.
|
Could be the CPS. x2 on checking the wiring. My IPR pigtail was melted and caused 3 weeks of frustration.
|
double and triple check everything
|
Agreed, double check...twice. And look at all the fuses too, one bad contact can cause one to blow.
|
All times are GMT -5. The time now is 09:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands