Diesel Bombers - replace lugnut stud in 96 psd??

Diesel Bombers (https://www.dieselbombers.com/)

- Ford Powerstroke 94-98 7.3L (https://www.dieselbombers.com/ford-powerstroke-94-98-7-3l/)

- - replace lugnut stud in 96 psd?? (https://www.dieselbombers.com/ford-powerstroke-94-98-7-3l/52356-replace-lugnut-stud-96-psd.html)

replace lugnut stud in 96 psd??

I had a lugnut stud pop off the other day and I was wondering if anyone knew how to replace one on the front driverside of my 96 f250 psd

Quote:

Originally Posted by strokin it (Post 571015)

I had a lugnut stud pop off the other day and I was wondering if anyone knew how to replace one on the front driverside of my 96 f250 psd

Beat them out... I would replace all if your replacing one.

OK beat it out and replace needs greater explanation.Sorry if I brake it down to far.Remove wheel calaper get book if not sure of what to do. Remove wheel and take of dust cap pull cotter pin and remove outter wheel nut remove rotor. Take place rotter on flat board and knock out broken stud(don't miss and hit the rotor) turn itover and replace be sure to line up the splineson the stud with roter and take a brass drift hit until completel seated. reverse process. NOTE this is a good time to check for bad bearings and seals. thats is for two wheet drive if four wheel drive buy a book and get ready to buy, borrow or steal special tools. Have fun :tu::argh::scare2::tu: