How Differant Is The 6.4 To The 6.0?
Just as its says I know about the turbos of course, but what about the block, ECM, and???
|
The block is the same block i believe, the fuel system is no longer operated by the high pressure oil...not sure what the new system is all about but it is different. Jon will know more about this.
|
the new system is common rail
|
Yes it is common rail rather than the deadhead rail system of the 6.0.
|
To put it best
they used the same block and improved on all the faults of the 6.0. So in short they improved on the fueling system which doesnt depend on oil quality like the 6.0 and of course they have changed the turbo set up. A pcm is a pcm. Never had any issues with them on the 6.0.
|
I thought the 6.0 had problem with the heads because of the lack of head bolts? Did they just increase the stroke or bore it for the increase in displacement?
|
That have a different front end and interior...LOL
|
Originally Posted by Logan
(Post 32625)
That have a different front end and interior...LOL
|
Well
The head issue on the 6.0 could have been avoided with head studs, but then you would have to lift the cab or pull the motor to remove the heads. I have done them in chassis and with the motor pulled. The easiest way is to lift the cab but my old dealer wouldnt let us. But the real problem is the torque to yield bolts and yes they need one more row like the 7.3.
|
they also have a fuel cooler on them. I'll post some pics if anyone is interested.
|
the difference is
a 6.0 sounds like its in a state of failure from start up the 6.4 is quiet when i bought my 08 there was a 6 L beside it both running at the same time and i couldnt hear the 6.4 oh and the 6.4 pulls a ton not as good as my cummins but it pulls good |
The Series Sequential Turbo's Are Just A "little Difference" Between The Two :tttt:
|
its a day and night differance on the power end of it i had the 6.0 i liked it but it was always broke down
|
All times are GMT -5. The time now is 04:14 PM. |
© 2024 MH Sub I, LLC dba Internet Brands