Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Ford Powerstroke 03-07 6.0L (https://www.dieselbombers.com/ford-powerstroke-03-07-6-0l/)
-   -   Any problems with turbo or EGR after removing muffler, and or cat??? (https://www.dieselbombers.com/ford-powerstroke-03-07-6-0l/86421-any-problems-turbo-egr-after-removing-muffler-cat.html)

wilde6.0 11-17-2011 02:53 PM

Any problems with turbo or EGR after removing muffler, and or cat???
 
My truck is an `05 6.0, and running about 135k miles, just wondering after i removed my muffler and or cat would it cause any problems with anything before the down pipe, i.e. turbo, egr..... thanks for any responses!

bobfbigman 11-17-2011 03:15 PM

If anything it will help out alot, it will help keep EGTs down and that is a good thing

wilde6.0 11-17-2011 03:48 PM

I've heard the EGT's will lower, bit have heard it will decrease backpressure and cause less boost and power.

---AutoMerged DoublePost---

BTW it is stock, no engine mods, and will be bolting up a S&B intake in the next few weeks.

Lange503 11-17-2011 04:41 PM

the turbo makes enough backpressure on its own, and it'll give you more power if anything taking the cat and stock muffler off

wilde6.0 11-17-2011 05:09 PM

i had a 7.3 and had the straight exhaust on it and it did boost power a little and actually helped out fuel mileage a hair. this 6.0 was bought in january by my father and since then he has put two new heads on it along with a new turbo. now im driving it and im just leary as to what will happen,if anything, to it. plus the sound is amazing from a straight 6.0.

Mdub707 11-18-2011 05:23 AM

There's still a chance for the EGR cooler to go again, but removing the cat or muffler won't effect anything other than noise factor. Do it! :c:

Senior 11-18-2011 02:13 PM


Originally Posted by wilde6.0 (Post 821662)
This 6.0 was bought in january by my father and since then he has put two new heads on it along with a new turbo.

I sure hope studs were used instead of bolts...I've run straight pipes on everything I've owned and never had any problems, other than neighbor complaints :rocking:

wilde6.0 11-18-2011 03:36 PM

I wanted him to use ARP studs, but everything that was used was OEM parts

Senior 11-18-2011 03:57 PM

:scare2: I don't get that. Was it warranty work?

EasternAggie 11-18-2011 05:33 PM


Originally Posted by Senior (Post 822000)
:scare2: I don't get that. Was it warranty work?

Im assuming it was just, "no were using factory parts". Idk for sure though...

Studs would have been much better.


All times are GMT -5. The time now is 12:22 PM.


© 2024 MH Sub I, LLC dba Internet Brands