Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Ford Powerstroke 03-07 6.0L (https://www.dieselbombers.com/ford-powerstroke-03-07-6-0l/)
-   -   Gauges (https://www.dieselbombers.com/ford-powerstroke-03-07-6-0l/85014-gauges.html)

Jm5687 10-23-2011 03:07 PM

Gauges
 
Anyone have any experience with the glow shift gauges? I want to add the pillar gauges before installing the fuel reg kit and banjo bolts, the sct tuner from mkm or innovative havent decided on that yet also could take some input on that if theres any differences but mostly want to know about these glow shift gauge kits, I want a nice set but no reason to spend more money if they will work fine.

ranger518 10-23-2011 06:49 PM

i have a set of them i have the EOT ECT EGT and fues pressure i bought them to see how they were and the only complant i have is that they are a little bright at night bit other than that i have not had any problems with them have had them for about a year now.

Mdub707 10-24-2011 07:35 AM

They're complete crap IMO.

They don't dim with the factory gauges, like you can do with pretty much any other gauge on the market. I know there is some mod you can do so that when you dim your lights they dim to 1/2 brightness, but it's not an adjustable dim like the others have.

They don't call them glowshit for no reason.

I know guys have used them and they work fine, but gauges are one of those things you get what you pay for

JMO!!!

Karls03 10-24-2011 01:22 PM

Be REAL careful installing the sending unit for the fuel psi, it doesn't take much to crack that housing. Then you'll find out what it takes to change said housing. :scare2: It SUCKED!!!

NeedinMoPWR 10-24-2011 01:54 PM

I have transmission temp, boost, and EGT... my EGT gauge was pinned to 1600 only about 2 months of installation... sent it in, they replaced it and sent one back. Now as for accuracy wise i herd there not the best. Another thing, I go to school in oklahoma but bought them back home in montana. I specifically asked them to call me when they got my gauge that I sent back to them. The lovely tech "specialist" said no problem. I called about a week after sending it in...and well they sent it to montana. No memo was found. In 3 weeks im heading back home with a load and no EGT gauge thanks to them...FML. I bought them to save some money but other than pretty colors they can change into im not really impressed. When im getting my new motor im definitely getting autometer or isspro

Mdub707 10-24-2011 02:04 PM

I run ISSPRO EV2's now, like them a LOT. Wish I could still get Dipricol Optix, but they've been discontinued...

Jm5687 10-24-2011 06:55 PM

Cool thanks for the responses. I will look into the ISSPRO'S I was also looking at the AEM I will do some searching around before rushing into anything


All times are GMT -5. The time now is 07:23 AM.


© 2024 MH Sub I, LLC dba Internet Brands