6.0 Cab Off Head studs, gaskets, EGR delete at home
 

Ok, started on Friday and it is now the end of the day Saturday. We have the cab off, and the heads are removed. Took us a full day to get the cab off under the circumstances haha. We had to rig up a few things but it all worked out. Here are some pictures and we are hoping to be done by Monday night! Keep your fingers crossed :c:


Attachment 41148
Attachment 41149
Attachment 41150
Attachment 41151
Attachment 41152
Attachment 41153
Attachment 41154
Attachment 41155
Attachment 41156
Attachment 41157
Attachment 41158
Attachment 41159
Attachment 41160
Attachment 41161
Attachment 41162

We got the heads off no thanks to that braided oil line that goes down into the block. I guess you need a specialty tool to take it off but we just made our own. Ill get those pics up tomorrow. Everything has gone pretty smooth so far except that. If any of you guys plan on doing this or have any questions let me know. Goodnight for now got to hit it hard again tomorrow.

Awesome dude! Keep taking pics for us!

:tu:

Well boys i got the head studs, egr delete, and everything from the block up back on the engine. Also got the cab back on and the interior put back together, Cleaned the radiator and the inter-cooler out. The inter-cooler was filled with oil. I spoke with someone who told me about a really cheap turbo mod because the VGT drains oil into the intercooler???? Said he has a hose running from the turbo to his frame rail and thats where is excess oil goes? Anyone heard of this? Said it was the CNV or C something mod. I found out that the turbo has been remanned. Doesn't have a date or mileage on it. The fins in the turbo dont have any play and look new. Is it normal for oil to be in the cooler??

Got the wife out there today to help clean up and sort tools that were EVERYWHERE. As you can tell she wasn't too enthused haha. I also put up some pictures of the socket i had to cut to be able to get that braided oil line out of there. I still say that was the hardest part of breaking that engine down.

Thanks for all the help guys

Attachment 41138
Attachment 41139
Attachment 41140
Attachment 41141
Attachment 41142
Attachment 41143
Attachment 41144
Attachment 41145
Attachment 41146
Attachment 41147

---AutoMerged DoublePost---

O and no i didnt put the gaskets straight on those dirty heads haha they were cleaned up and checked!

Awsome Job Bud :c:

O and one last thing. I kind of procrastinated on getting my coolant. In this engine would running straight water damage the engine or would i overheat? I know it sounds dumb but i have to hit the road monday morning to head back to base and there are NO dealerships open?? Checked all the walmarts and autoshops around and nothing!

You'll be fine with distilled water (MAKE SURE IT'S DISTILLED!!!). Just don't leave it til winter time, or you're going to have major problems.

As for the oil drain, that is complete nonsense. The oil from the turbo drains back into the motor and needs to continue to do that. What you CAN do is the CCV mod, which is just a crank case vent. That vents into the intake in FRONT of the turbo. The oil goes into the turbo and through the intercooler piping and into the intercooler. Every 6.0 out there does this, it's not the end of the world, but you can see it does make an oily mess on intercooler boots and what not. Just search for CCV mod. There are a few ways to do this. It has nothing to do with oil feed or oil drain for the turbo, that NEEDS to remain intact!


So how long did this actually take you of real working time? Pretty interesting setup you had there, I dig it.

Thats the mod he was telling me abut, just didnt word it right i guess.

Well 90% of the first day was figuring out how to hang the cab, a few dents later we found a way that actually worked. but after that it only took 24 hours. Made one hell of a weekend though. We built the engine from the block up, torqued the heads and all that junk, got the cab on and put the interior back together in 8 hours. I just drove it 8 hours and she purred the whole way!

Just out of curiosity, what did you do for surface prep on the block? That's one area I can't ever seem to get a defnite answer. Some people do nothing, some go through the whole 9 yards, and I get different answers everywhere I ask. Some work no matter what, others don't, I can't seem to find a common denominator. Just wondering what you did, if anything. Thanks for all the pictures!:c:

I cleaned it up with a hard plastic scraper then used a light wire wheel to get the hard stuff. Doesn't leave any scratches or gouges but it cleans it nicely. Ive always done that to my gasser trucks and haven't had any problems. Ive got some more to put up later tonight. I have a vid of initial start up too. Still sounds rough because of those two injectors. Has like a lope idle haha. Im pullin mine out this week and taking them up to get my new ones. It just sucks that i have to get back under the hood that quick but i gotta do what i gotta do.