Head Gaskets
i am getting ready to do my head gaskets on my 05 F350. i am going to take the heads in to get decked i have ARP studs but i am not sure what type of gasket i should use or a good place to buy one? also while i am in there i am thinking on doing the egr delete is there anything else that i should do while the cab is off and it is easy to get to the whole motor? Thanks
|
IMO the OEM head gaskets are best. You can get them for $135 each from TousleyFordParts. Just as an FYI, they come w/ bolts, just discard them. If you want the OEM head gasket by itself, BulletProofDiesel sells them without the bolts.
I believe the part # is 4C3Z-6051-EB. Call them and verify (due to changes in heads in the 05 - 06 time frame). Tousley Ford |
will there be any problems if i use heads of of a 07 and where are the dowels so i can make sure i get the right gasket
|
You can use the 07 heads. You just need the conversion kit for the alignment dowels since the 07's use 20mm dowels and the 05's use the 18mm. Call Tousley - they can get you what you need for a reasonable price. For that matter so can BulletProofDiesel.
|
ok thanks ill give them a call
|
Agreed, stick with OEM gaskets.
|
All times are GMT -5. The time now is 11:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands