6.0 smoke switch
 

Can anyone tell me how to hook up a smoke switch in my 6.0 so I can dump black smoke

Cut the VGT solinoid wires and run a switch. its not worth it. your trucks going to run really poor and it could screw up your turbo pretty bad.

Which wires, where is the vgt solinoid

^^^

Big Angry Quoted me now Im quoting him "Not trying to be a dink, but if you need to ask, you probably shouldn't toy around with that stuff."

Read more: https://www.dieselbombers.com/ford-p...#ixzz0TMiwiJO8

That is really funny. I guess since i drive my truck to and from work, the whole runs poorly thing would scare me. LMAO!

There are 2 wires coming off the front of your vgt <turbo> Cut either of the 2 wires coming off the harness and run a toggle to both sides of that wire. And now you know but I would listen to everybody on here when they say it is a bad ideal. I had one and my turbo lag doubled with it installed. It is cool but there are better ways to roll coal. And in my opinion The guys on here know there stuff, I would take the advice from a large number of people in agrence on a subject. :c:

Smoke = wasted fuel.

VGT not working = Turbo not making boost

Switching VGT Sol. off = CEL and DTC's

You can make it smoke by putting a plastic bag in the air filter inlet too, don't make it a good idea.

X2 :ph:

From what I've seen ; if you smoke buy a Dodge , for the power - stick to the POWERSTROKE:yeah:

---AutoMerged DoublePost---

LMAO

not to mention the high egts your goin to get along with that smoke