TSB?How do you update it?and welcome:c:

It was a service bulletin to update the FICM but it wouldnt take it, so i need a new FICM(incase anyone knows where a used one is)..the bulletin came out in July i think, the bulletin stated it corrected some issues with cold starts, white smoke at start up and something else..

They are probably not doing it right.

Tell the technican to do a PMI on the module, not a Reprogram.

When it asks "install new module" leave the old module on the truck, and click OK.

You can't "reprogram" the FICM to the latest and greatest level with the new 'rattle flash'. You've gotta do Programmable Module Installation so it goes to the latest level, for some reason.

If he was reading the TSB right, it CLEARLY says "Perform a PMI on the FICM" as one of the first steps.

HTH.

ficm (fuel injector control module)

well mine just through 2 new codes along with the ficm,po261...po273 low injector circuit in 1 and 5:argh:probably wont be long before she stops on me.It still isn't missing or acting funny:humm: dont understand why?

Because it may not have low voltage all the time, it may have dropped below spec at least twice.

I would start budgeting to replace it.

Thanks man...:c:

Strange that we didn't see a lot of FICM failures up till about the last year or so...and now they are dropping like flies - regardless of year or mileage. I change as many 06-07 FICMS as I do 03-04's.

:humm:

That's a very interesting. I wish there would be a recall,but with my luck lately that will never happen:ouch:

---AutoMerged DoublePost---

Called my local ford dealership,They told me a new ficm would run $625 and to get it flashed and installed $150...time to start counting my pennies

P0611 SCANNED CODES
 

i just came back from getting my truck diagnosed using a scanner

P0261¸
P0264
P0267
P0270
P0273
P0276
P0279
P0282

P0611

P2617


FICM SHOWING 40.93 VOLTS RUNNING ON SCANNER
48.5 KEY ON
48.5 CRANKING AT MODULE

The truck will not start ....unless plugged in....

When plugged in it starts fast and responds good:tu:

---AutoMerged DoublePost---

they seem to go in cold climates too:argh:

Mine is showing 40 volts on the scanner running

and throwing the p0611 code(ficm)