6.9-7.3 l non turbo swob
 

k i got a 86 ford w/6.9L im going to put a 7.3L with non turbo in it but i also have a 99 w/7.3L powerstroke in it and im wanting to take the turbo off it and put on the 7.3L non turbo is thise possible without swopping the intake or heads:humm:

The intake or heads off a power stroke wont work on you 7.3 as far as I know. The turbo would fit if you make it but my guess would be it will make to much psi. You could turn that down but I don't know how that would work.

ok so i would need the inter cooler and about how much psi would i want without herting the motor

I am going to guess that it would be somewhere around 10-14psi but then I don't know how well the turbo would work. I would just hang around for a while and there are a few guys on hear that know these engines really well and they can help you with this.

that would be grait thanks for your help

u can install the psd turbo, but it will be an all custom job. nothing will bolt on.

10-12 psi is max without headstucs

best bet and easiest would be to find a turbo made for the idi. banks, ats, and hypermax all made/make them.

thanks
:argh:

---AutoMerged DoublePost---

o anouther dumb quistion will the head studs off the powerstroke work on the idi

no.

dose anyone no someone or have a turbo that will work on my 7.3 idi that they would be willing to sell i looked on ebay and no luck

craigslist??