gear ratio
How do i figure out what my gear ratio is without having to remove the diff cover? Im trying to figure out what Im running so i can figure out a way to get better mpg and get away from 2500 rpm at 70mph. My truck has a 7.3 with a 5speed sittin on 265s.:argh:
|
I'm assuming you have 4.10 gears. Alot of those 7.3's were geared lower for pulling. Especially with the 5 speed.
|
on the diff over should be a little tag with a bunch of numbers on it. probly rusty, but it will say on the second line the first 3 numbers will be gear ratio
will either be 3.55 or 4.10 |
It might also say in the door jam
|
no tag on rear axle and the door jam just says its a C5 axle
|
That code should be 4:10 limited slip
|
ok found the tag (never let brother-n-law look at truck) first three numbers are L10 so does that mean it has 4.10s in it
|
Ive seen 4L10
|
all i saw was the L10 have to scrap off a lil bit more to see if there is a 4 or not
---AutoMerged DoublePost--- it says 4L10 |
Yes. C5 axle code is a 4.10 limited slip axle.
|
All times are GMT -5. The time now is 06:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands