94 idi turbo injectors
 

Ok i just bought a 94 idi its got an ats turbo system i turned the pump about an 8th anybody got ant suggestions to get a little more power out of it? i have always had a turned up cummins but got tired of always fixin the rest of the truck i know i wont get this old idi runnin like that but would like to get a little more out of it. is there anywhere to get decent performance injectors?

You could get a set of pressure matched BB code injectors from Russ(Typ4) over on oilburners. If you have plenty of money, you could get the moose misters from Mel(agnem). Otherwise DPS makes IDI injectors, but I have never heard anything good about them.

ok thanks. how much further can i turn the pump before im just makin smoke and heat? im doin the exhaust and gettin an intercooler this week.

I turned my pump up 2 flats, just enough to haze at WOT. It can be different for each truck though. I figured 2 flats was a good place to start. Just turn it up in small increments to where it just starts to smoke at WOT. Any more and you are just wasting gas, carbon coating your motor and giving the eco-nazis ammo for our demise.

yeah ok i hear ya. not quite profiecent with the lingo here yet sorry. 2 flats would be what exactly? like i said earlier its turned about an 8th rite now

The screw is a 6 sided allen screw, 6 flat sides. 1 flat equates to 1/6 of a turn. It took me awhile to figure this stuff out too. :tu:

ah ok now i got ya!! lol thanks alot:rocking:

how much you want for your moose misters sycostang? and what is the power and mpg gain on them.

I dont have moose misters, mel(agnem) over on oilburners sells them. Not sure about power/mpg gains, but they are pretty spendy injectors, about $1k for a set I think. I'm going to get some BB codes when the money allows.

Thanks buddy and ya for a thousand buck f that i'll go with BB instead and hey can you read my post in aftermarket idis about my dad and I's full out factory turbo and give me some ideas for hp. grealy apperciated