ok I know now whats going on... your getting air in the system somewhere... take ur fuel filter housing lines from the lift pump and run it straight to the IP... then rev it up and see if it clears out ... your getting air most likley from the old filter housing some where.... i pulled mine and have a new filter head that i know is sealed and im running a Bio-Glass 5 Micron fuel filter ... way better
|
OK SO MY OLIVES ON THE ENDS OF THE LINE THAT GOES FROM FILTER HOUSING TO IP ARE BAD AND NO ONE AROUND HERE NOWS WHAT THE HECK I AM TALKING ABOUT SO I PRINTED A PIC TO BRING TO PARTS STORE TOMORROW BUT......
THE LINE ALSO HAS A CRACK IN IT :argh:AT THE BASE OF THE FILTER SIDE SMALL VERY SMALL SO I NEED A LINE BUT I PICKED UP A 90 DEGREE NIPPLE FOR THE FILTER HOUSING AND 18" OF FUEL INJECTION LINE THE HEAVY STUFF 3/8. BUT I CANNOT FIND A FEMALE NIPPLE FOR THE END OF THE IP SIDE SO MAYBE I WILL JUST GET SOME TUBING AND BEND AND FLARE MY OWN....:w2: I HAVE DONE PLENTY OF BRAKE LINES SO SHOULD BE ABLE TO HANDLE THIS THATS IF I CAN GET THESE "OLIVES" UNLESS YOU KNOW WERE TO GET THEM....:humm: OR GET A LINE WITH NEW OLIVES IM JUST PUTTIN THIS OUT THERE BECAUSE MY BROTHER TOTALLY MADE THIS MAKE SENSE NOW I REALLY DIDNT EVER THINK HARD ON IT BUT MAKES PERFECT SENSE HE SAYS " ITS LIKE TRYING TO SUCK SODA THROUGH A STRAW THAT HAS A CRACK IN IT, IT JUST DOESN'T WORK" WELL SAID ID SAY:c: |
4X4MANONBROKE
DO YOU HAVE PICS OF YOUR NEW FUEL FILTER SETUP AND MAYBE PART # THANKS |
Those olives are not easy to find, and they come in all different sizes. When I found that mine was leaking, I couldn't even get them out easily, I had to soak the whole line for about 4 days in gasoline and use a pick to chisel it away.
|
YA MINE ARE STIFF TO THEY ARE SITTING IN BRAKE FLUID RIGHT NOW, IHAVE NOT BEEN OUT TO THE SHOP TO SEE HOW THEY ARE NOW, THEY WERE SOFT LAST NIGHT
|
I lied, its called a Fuel Injection Pump Install Kit, you can get it from autozone for $14 comes with the 2 olives for that main ip feed line, the seals on the shaft of the injector pump for if you remove it, and the 3 front bolts that hold it to the timing gear.
|
Originally Posted by Dortiz
(Post 1062966)
I lied, its called a Fuel Injection Pump Install Kit, you can get it from autozone for $14 comes with the 2 olives for that main ip feed line, the seals on the shaft of the injector pump for if you remove it, and the 3 front bolts that hold it to the timing gear.
NEW REMAN IP http://i1340.photobucket.com/albums/o724/sabbath-2012/IMG_20140527_132801_zps9c66e2d3.jpg JUST BECAUSE I COULD.... SO I DID http://i1340.photobucket.com/albums/o724/sabbath-2012/IMG_20140527_135615_zpsb110ba48.jpg SPOT YOU NEVER SEE http://i1340.photobucket.com/albums/o724/sabbath-2012/IMG_20140527_143118_zps9ca27291.jpg NEW PUMP INSTALLED http://i1340.photobucket.com/albums/o724/sabbath-2012/IMG_20140527_143511_zpsc5e96eab.jpg TIMING LINED UP http://i1340.photobucket.com/albums/o724/sabbath-2012/IMG_20140527_143533_zps5f7d5e16.jpg MY LINE HAD A CRACK SO I HAD A HYDRAULIC FLAME RESISTANT HOSE MADE http://i1340.photobucket.com/albums/o724/sabbath-2012/IMG_20140528_141051_zpsaadb6b4f.jpg TH NEW FITTING FOR THE IP OLD ON TOP NEW ON BOTTOM http://i1340.photobucket.com/albums/o724/sabbath-2012/IMG_20140528_141742_zps8d77c48c.jpg THE NEW LINE INSTALLED http://i1340.photobucket.com/albums/o724/sabbath-2012/IMG_20140528_142508_zpse691cf14.jpg AND HERE ARE A FEW JUST FOR FUN OF SOME BEFORE AND AFTERS TRUCK THE DAY I BROUGHT HER HOME http://i1340.photobucket.com/albums/o724/sabbath-2012/94F350J1_zps95ebb423.jpg FACELIFT http://i1340.photobucket.com/albums/o724/sabbath-2012/94F350J7_zps656aedc9.jpg AND NOW http://i1340.photobucket.com/albums/o724/sabbath-2012/IMG_20140508_133805_zps3d3b7459.jpg ALSO THIS DID NOT FIX MY ISSUE:argh: SO NOW I WILL BE BY PASSING MY MECHANICAL LIFT PUMP WITH A ELECTRIC ONE AS SOON AS I FIND IT :dang: |
HMMM THE PICTURES DO NOT SHOW UP ON MY MAC SO TO SEE THEM I CLICK ON THE "PHOTOBUCKET VIDEOS" LINK ON TOP AND IT COMES UP WIERD
|
what kind of paint did you use for the final coat?
|
NO FINAL COAT YET I STILL NEED TO PAINT ON MY PIN STRIPING AND DO A MIRAL IN THE CAMO.
|
All times are GMT -5. The time now is 12:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands