Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Ford 83-94 6.9 and 7.3L General (https://www.dieselbombers.com/ford-83-94-6-9-7-3l-general/)
-   -   Building My IDI (https://www.dieselbombers.com/ford-83-94-6-9-7-3l-general/103906-building-my-idi.html)

rmaseda22 10-17-2012 02:02 PM

Building My IDI
 
So i have a 7.3 IDI non turbo and i am rebuilding my motor but i want to know the best head studs to use as well as injectors and turbo. i pretty much want to make the motor bulletproof with more power and torque but still be able to roll some serious coal.:tu:

billiard 11-08-2012 04:50 AM

id say arp headstuds are the way to go. im not sure where to find them but you can run moose injectors and injection pump from what ive heard. he matches the injectors to the pump

blacksmokeaintbroke 11-08-2012 08:44 AM

keep us posted on the build,what you use,and what horsepower you end up with.

rmaseda22 11-08-2012 12:28 PM

will do boss. ill upload some pictures of my rig and what it looks like now. and thank you billiard for the info. im going to look into that. as of right now im doing a solid axle swap in her with 4.10 gears.

fordidipower 11-11-2012 05:53 PM

i have a turbo bmw and i didnt want to pay for headstuds from arp and looked online and all the european dudes use metric blues wich are no tapper non stretch and they work great. so you could get bolts that are the same size and thread pattern as stock and wont stretch from an online high grade bolt dealer. save loads of money.

Kalashnikov 11-22-2012 10:43 AM

I see you're from MA. I'm out in sothern worcester county

I would just buy BB injectors and a rebuilt turbo pump and crank up the fuel screw. The moose pump and injectors are worth the money IMO. Might as well stroke it if you're gonna drop that kind of cash.

rmaseda22 11-24-2012 07:48 PM

yea im from the cape @Kalashnikov. and ive heard bb code injectors are good for the IDI's if you want to upgrade them. if any of you guys know, whats the difference between stock and bb code other than the spray pattern?

Kalashnikov 11-25-2012 12:06 AM

I think pop pressure was higher on BBs.

daves93f250 06-22-2013 10:45 PM

i think the moose pump's and injectors are on sale at oilburners some guy sells them there.

4x4manonbroke 06-23-2013 04:09 PM

Well the issue your gonna run into no matter what u attempt to run is cylinder temp and not being able to run much for boost ..... unfortunately ur limited by tue design of the engine ...... I do wish tuere was a way to make gobbs of power with these ..like a 12valve ..... but the design is good .... just not with a bunch of boost ..... I have BB injectors and my truck runs awesome .. the only issue is interior noise


All times are GMT -5. The time now is 04:43 AM.


© 2024 MH Sub I, LLC dba Internet Brands