|
Bad CV joint?
|
Not CV's on an SFA.
IDK, I stuck a steering box stabilizer on it, and greased the tie rods really good, so far no death wobble. :humm: |
Originally Posted by sthrnrider
(Post 881066)
My tires are new maybe 5k on them. I just bought the truck end of January. I'm taking it up have them rebalanced. My biggest concern is the thumping feeling I get in the pedals and steering wheel while turning.
|
Originally Posted by 1AMatt
(Post 885441)
Bad ball joint, bad control arm bushing maybe?
|
Originally Posted by tiremann9669
(Post 879701)
Speed specific vibrations are often a tire balance problem. :c:
So I felt this horrible shake, braking , corners etc... i honestly thought it was the brakes on the front, rotors warped or something.. Ended up looking at the front drivers side tire it had wires coming out of the side etc.. so that tire was shot, replaced it with a new one., took the spare out from under the truck, ( it was Brand new) , put that on the pass side drivers. Took the tire from the front pass and put in on rear pass. and left the one that was ok on the drivers rear........ Still get a bad vibration from the back tires it feels like now, it seems to be coming from the rear, so im thinking it must be in that tire.. does a tire sep from the inside and not show on the out side. these tirese had 80.000 k i think there original from the dealer. I need a good tire/rim for this truck. whats the best way to go... 20 inch for the roads we drive are pretty useless, as there is a pot hole and road heaves every where. It sucks when you drive over the pot holes and worry about my tires. A recomendation would be nice, ive heard the 18" Duratrecs are the way to go....your thoughts? \Original tires on this 07 Dodge Ram 5.7 l Hemi are...275/60/20.GY Wranglers. I dont think i want to buy two more of this tire if they just seperate at 80k.:humm: |
| All times are GMT -5. The time now is 08:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands