|
Originally Posted by tiremann9669
(Post 689841)
Front main is an easy repair plus if your kdp isn't secured you wanna fix that before :s::s::argh::argh::argh:
Dr. evil do u happen to know what the battery terminals are made of that the guy at custom battery cables sells not sure if u bought terminals from him or not i just dont want any of those lead cheap-o terminals just curious if u know ---AutoMerged DoublePost--- also if anyone knows where i could rent crimpers from and a heat gun like any chain of part stores that usually have them i just got off the phone with autozone i figured they would have some but they dont have crimpers or a heat gun just wondering if any body knows of a different place i could rent from :c: |
You have to go to a tool rental place....RSC Equipment is the major one up here...try them if you have one close
http://www.rscrental.com/RentalCente...ryListing.aspx |
thanks dr.evil ill give them a call:c:
|
Originally Posted by Dr. Evil
(Post 689310)
Heavy Duty, Aftermarket, Custom Battery Cables for your Car, Truck or RV for custom made cables or parts (and great advice too). If you look there they also have the correct length of cables listed.
Use 2/0 welding cable. I would strongly suggest crimping instead of soldering. I did a couple of solder joints and didnt like the results. You dont have to buy a crimper you can rent them for a day. Heres what mine turned out like: http://i14.photobucket.com/albums/a3...x/100_0737.jpg http://i14.photobucket.com/albums/a3..._2547small.jpg http://i14.photobucket.com/albums/a3..._2546small.jpg http://i14.photobucket.com/albums/a3..._2551small.jpg |
I contacted the battery cable place... We will see if they email me back.. Mine are BEYOND shot. The clamps are broken in half. :argh:
|
hell I can make battery cables I have all the stuff to do them and I have MANY used stock cables to mock up off of :w2:
|
Originally Posted by big bad diesel 416
(Post 701290)
hell I can make battery cables I have all the stuff to do them and I have MANY used stock cables to mock up off of :w2:
|
Originally Posted by big bad diesel 416
(Post 701290)
hell I can make battery cables I have all the stuff to do them and I have MANY used stock cables to mock up off of :w2:
|
I also used the marine/rv style batt terminals with big ring connectors ( from home depot) and the stock cables. That way it is easy to hook up accesories too. I've been running the aurozone brand Terminals for 3 mounths (on a 1st gen) starting it every morning cold with zero problems.
|
Dr Evil
Where did you get the brass terminals?? Don't think custombatterycables has them?? Take it you made yours? Thanks for the note on soldering them - I was going to go that route but may not now! |
| All times are GMT -5. The time now is 08:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands