Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Diesel Engine Conversions (https://www.dieselbombers.com/diesel-engine-conversions/)
-   -   Ezgo and a kubota (https://www.dieselbombers.com/diesel-engine-conversions/69824-ezgo-kubota.html)

stinkfist5.9 02-07-2011 03:14 PM

Ezgo and a kubota
 
3 Attachment(s)
soon to be diesel powered....i hope Attachment 42961 Attachment 42962 Attachment 42963

Billy D 02-07-2011 04:18 PM

Holy cow!:humm:

Jazz 02-07-2011 04:24 PM

lol I love it:c:
Please keep us updated on this:tu::choochoo:

GuyWithA24Valve 02-07-2011 04:52 PM

Thats gonna be awesome if you do it! I'm jealous :tu:

stinkfist5.9 02-17-2011 07:31 AM

2 Attachment(s)
i rebuilt the engine over the wkd. now its time to start stuffing it into the cart

jmac5058 02-17-2011 07:50 AM

Are you making a stump pulling golf cart?

superduty_5.9 02-18-2011 09:32 AM

That's awesome. That looks just like a D600 Kubota I have. Mine is going on a 1650 Cub Cadet.

93_Fummins 02-18-2011 01:20 PM

Love the cart project! :tu:

Superduty_5.9...I'm also looking at putting a three-banger Kubota in a old Cub mower. :rocking:

stinkfist5.9 03-02-2011 08:16 AM

6 Attachment(s)
Tight fit, i will have to widen the frame some. i had to fab a flywheel plate and clutch shaft. my old clutch compared to my new comet 1190. clutch installed on flywheel

tiremann9669 03-02-2011 10:46 PM

Dang you're gonna be the envy of the campground :pca1:

superduty_5.9 03-21-2011 07:44 AM

That looks awesome! Progress looks good.

Huntercody 03-21-2011 06:33 PM

Looks good so far. I'd like to see pics when it's done!

DieselCrawler 03-22-2011 07:34 AM

4 Attachment(s)
already got one in a cubby, err as i call it the Kubby. d950 i rebuilt.
if the tractor breaks i was gona stick it into the cart behind it in the pics.
Attachment 42435
Attachment 42436
Attachment 42437
Attachment 42438

stinkfist5.9 03-28-2011 08:34 AM

2 Attachment(s)
Looks goof :tu:

---AutoMerged DoublePost---

Attachment 42336The engine fits between the frame rails after widing it 4 inches. Now ive got to do axle work to get clutches in line. F/w housing had to be milled for belt clearance Attachment 42337:c:

DieselCrawler 03-28-2011 10:44 AM

btw, if u want a decent rad that cools great, the one i am using is out of a honda civic, i belive early 90's vintage.

stinkfist5.9 03-31-2011 07:43 AM

5 Attachment(s)
frame is 4 inches wider in the enginge bay. had to build new axle tubes, left tube is 3 inches shorter and the right tube is 3 inches longer. Attachment 42313 Attachment 42314 http://i1112.photobucket.com/albums/...-21-23_983.jpg Attachment 42315 Attachment 42316 Attachment 42317

stinkfist5.9 04-16-2011 10:41 AM

4 Attachment(s)
Front and rear engine mounts. Started building fuel tank. Attachment 42087Attachment 42088Attachment 42089Attachment 42090

geddy's uncle 04-16-2011 10:48 AM

:humm: You people scare me :moon:

GuyWithA24Valve 04-17-2011 10:53 AM

Awesome :tu:

deck60 04-17-2011 11:01 AM

looks like this is a hell of a party building this ohhhh whiskey make my head hurt!!!!!!!!!!

have fun with looks like you have some good fab skills going on there

stinkfist5.9 04-20-2011 02:03 PM

1 Attachment(s)
Thanks :c: fuel tank is mounted"still needs polished and a fill neck. Battery tray is mounted and started running fuel lines. Got the radiator, but im running out of room and jack. Radiator core is 12x12. Attachment 42030

chevyhoss 04-20-2011 08:59 PM

thats awesome what is the whole project cost

EasternAggie 04-21-2011 12:27 AM

I would drive that thing everywhere :choochoo:

Diesel Powered Rocket 04-21-2011 08:43 AM

stinkfist5.9, This is a great build project. :rocking:

DieselCrawler 04-21-2011 12:37 PM

what u doing for axle shafts? just going to sleeve it to make it longer?

stinkfist5.9 04-21-2011 09:43 PM


Originally Posted by chevyhoss (Post 742802)
thats awesome what is the whole project cost

Too much...but i like to do it

---AutoMerged DoublePost---


Originally Posted by chevyhoss (Post 742802)
thats awesome what is the whole project cost


Originally Posted by Diesel Powered Rocket (Post 743030)
stinkfist5.9, This is a great build project. :rocking:

Thanks, hope to have it done soon

---AutoMerged DoublePost---


Originally Posted by DieselCrawler (Post 743143)
what u doing for axle shafts? just going to sleeve it to make it longer?

Im going to sleeve them for now and make sure everything works out,dutchman motorsports in portland OR can build the axles when im ready.....250 apiece tho

LORDDiESEL 04-21-2011 10:52 PM

i love it!

stinkfist5.9 05-05-2011 10:12 PM

3 Attachment(s)
Ok heres my radiator and intercooler setup. Started on the hoses and piping.Attachment 41853 Attachment 41854
---AutoMerged DoublePost---

Heres the Gt12 turbo that i will be using. Flanges are cut and ready to start welding pipe.Attachment 41855

LORDDiESEL 05-05-2011 10:42 PM

awesome!

C16 power 05-06-2011 12:21 PM

This is freaking sweet! Why haven't I seen this sooner :dang:

tiremann9669 05-06-2011 10:28 PM

We need video when you fire that bad boy up :jump::jump::jump:

FTE 05-07-2011 01:22 AM

What turbo are you planning to use?

Diesel Powered Rocket 05-09-2011 03:39 PM


Originally Posted by FTE (Post 750234)
What turbo are you planning to use?

:humm: Post #28 says gt12 turbo and there is a picture of it also.

geddy's uncle 05-09-2011 05:52 PM

Looks like a fisher-price turbo, with a Happy Meal wastegate!:rocking:

FTE 05-10-2011 12:50 AM

Oops, missed that! Thanks

stinkfist5.9 05-11-2011 09:55 PM

2 Attachment(s)
I got the header
Put together and welded and my electric fan mounted. Attachment 41778 Attachment 41779 http://i1112.photobucket.com/albums/...9-41-37_53.jpg

DieselCrawler 05-12-2011 11:25 AM

looking great so far.

EasternAggie 05-15-2011 07:26 PM

Agreed lookin nice :c:

stinkfist5.9 05-15-2011 11:01 PM

1 Attachment(s)
Thanks :c:. I picked this up from C/L, its a used txt body that i like better than what the cart came with. I also had to move my fuel tank to the right side because of the exhaust and turbo. My battery will be moved to the front of the cart under the hood. I will be repainting. Attachment 41736

EasternAggie 05-16-2011 11:17 PM

I need to make a trip to where your at to check out all your toys lol


All times are GMT -5. The time now is 06:19 PM.


© 2024 MH Sub I, LLC dba Internet Brands