looking to relocate om617 oil-filter housing...
 

Currently In the middle of installing this motor into my fj40 (early toyota landcruiser).

would love to replace the housing completely...with a modern spin-on filter solution.

found a examples online, please see attached.

any other options?

thanks,
manny

Check superturbodiesel.com - tuning performance turbo diesel mercedes, W123, W116 and up. OM617, OM60X and the Mercedes section of www.4btswaps.com Most people fab their own and use AN fittings, braided SS hose, and a regular remote filter adapter.

It is not a good idea to replace the factory oil filter with a "modern spin-on". The benz unit is not only a main and bypass filter but thermostatically controlls the flow through the cooler. This is way better than a single spin-on, if you need to move for clearance then just remote mount the facory unit. What trans are you planning on using in the FJ?

External oil cooler thermostats are available for around $50.

A cooler must be installed though and it needs a thermostat set for over 212*f.

sounds like the best option if to make an adapter that allows me to relocate the stock housing...
found the following example:

Attachment 44457



FTE,
tranny is a sm465:

Attachment 44458


made possible w/Luke's kit (4x4labs.com):

Attachment 44459


thanks for the replies,
manny

Hey looks great! I see you also have the motor with the cali emissions although yours has already been deleted. I kind of like the turbo mounted up high, and the intake looks like it flows better. I like your FJ! Keep us posted.

Worse actually, the air has to make two hard right turns instead of flowing straight in.

Regardless of number of turns, I'll bet you guys will be able to see the grin on my face...the day I drive her home :D

as always, thanks for the info.

With the help from a few friends, I know have an adapter made from 5/8" aluminum...really happy with how it turned out

Used a gasket, as a template:

Attachment 43865


Attachment 43866


will be using 1/2NPT to AN8 fittings

Attachment 43867


Attachment 43868


final trimming:

Attachment 43869


test fit:

Attachment 43870


the biggest reason for my oil-housing relocation was due to a parking brake cable interference...no longer an issue :)

Attachment 43871

Great job on whittling that piece out.Give me a few days and I'll have one filed out of aluminum. :lol88: