Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Diesel Engine Conversions (https://www.dieselbombers.com/diesel-engine-conversions/)
-   -   DT466 Pulling truck Build (https://www.dieselbombers.com/diesel-engine-conversions/55526-dt466-pulling-truck-build.html)

M1008DT466 10-08-2012 12:46 PM

Thanks (nevrenufhp) I'm gonna check it out. Let me know if you think or any other places. And I want to find a good brand to put a larger turbo on it. And if or suggestions would be much appreciated.

twinturbogarrett 10-12-2012 01:15 AM

all trade a twin turbo set up B1 and B2 bomber for an hx66

mattalex87 11-02-2012 08:27 PM

I have a 1970 IH 1210 pickup, currently it has a 345ci v8 and a 4speed i want to swap it to a mechanical dt466.. What trans should i use? what year engine should i look for? whats the stock hp and tq of that engine? all i want to do is mild truck pulls and have a reliable cool truck? oh and with 4:10 gears, 33in tall tires and a 4speed my top speed isnt great 60mph and the engine is singing id love to be able to go 75/80 on the freeway

twinturbogarrett 11-04-2012 09:34 PM

get a 12valve second gen motor, buy a 160 P-pump, laser cut nozzels and max out the P-pump should be 1200 RPM what mine is pushing. Fass fuel 220 sending 35Psi to the pump. 5x15 injectors. studded and fire ring the head buy a twin turbo set up 64mm and 72mm bambers with 5" exhaust turbo-back. take the blow by tube unhook it from the intake and run it down to the axle more HP. tranny get a nv4500 trans with a south bend dual disk 1300hp. all in all im making 610Hp with 1100L tq.

---AutoMerged DoublePost---

and 5K GSK

4662010F250 09-21-2021 12:58 PM

2010 F250 dt466 swapped
 
I’ve been reading these forums on this swap for a year now. Tons of heat info from you guys. Granted some of these forums are old as hell. Jan this year 2021 I started my swap due to a blown motor. It’s been an absolute blast doing it and a pain in the ass. It’s like running track 110m hurdles in high school but they are higher than you thought and you trip and fall and have to overcome. I did overcome and got it into its rough draft formation and drove it around for over a month. The truck is so fun to drive and sounds bad ass. I still have quit a bit of final building stuff to do like new piping for turbo and cooler. And build a new cooler. But ultimately ver pleased with this project especially as a daily.
https://cimg9.ibsrv.net/gimg/www.die...09fa0c85c.jpeg
https://cimg7.ibsrv.net/gimg/www.die...32a32eca4.jpeg
https://cimg9.ibsrv.net/gimg/www.die...77d4322c2.jpeg
https://cimg0.ibsrv.net/gimg/www.die...f92aa22ee.jpeg


All times are GMT -5. The time now is 07:25 PM.


© 2024 MH Sub I, LLC dba Internet Brands