intercooler questions?
Hi guys,
I got my engine mounts on order should be here in next two weeks since Ryan is a bit behind on them :D.. 1st question? the intercooler in the dodge trucks is way to derned big to fit in the engine compartment with the way the inner fenders are designed. Is there any way to design a compact mount intercooler that will handle the airflow tha tI will need for a stock engine. Or should I mount it in the bed of my truck with some fans attached to it? Any advice would be wonderful? Thx Sean |
you could check out a PSD intercooler. IIRC they are more square shaped.
|
psd intercooler
Yeah I check out the dimensions on the psd intercooler and it is about the same as the cummins factory one and is too big for what I am working with. Tho on a positive note I found a company Advanced Race technology that says he can build a smaller more efficient intercooler that will fit my needs perfectly. I got to get a few more measurements and once those are done he is going to get me a quote for a bar plate style intercooler.
So we will see what he comes up with... Sean advancedracetechnology.com guys name is derrick he has apparently built some diesel intercoolers in the past for dodge trucks |
you can also hit up ebay.
|
Hmmmm let me ask this?
What is the minimum cfm flow rating on an air to air intercooler that I will need for a stock truck and cummins?
thanks Sean |
someone correct me if I'm wrong, but since its a pressurized system, as long as you keep boost at the intake the volume doesn't matter.
|
no but I know someone who LOVES pearl necklaces!!!!
effin spam lol |
I agree check out ebay. You can usually find something to work from there and the price isn't usually horrible. What about a behind bumper style like ATS used to make for the OBS 7.3's? Would something like that be to big? I have used ones like that in OBS cummins swaps and they work great.
|
hmmm will check that out
Hi there,
Thanks Will go check those out. Since i am doing ac in the truck space is going to get really tight really fast so will take a look at the behind the bumper setup you mentioned. Should have my brackets friday and my allison by sat so next wekk lotsa of grunting shoving and yelling at my engine lift lol.. Sean |
Ahhhh lovely beer kegs :D
Ok have solved the intercooler dilemma lol. I am going to have one built into a beer keg with dual fans and iceable provisions maybe even throw some liquids into the equations. hmmmm wondering if etoh is a good heat sink??!!?? hmm have to investigate that one lol. Got the engine mounts in hand and trans as well. Missing a few parts to the trans but what can I say for 500$ allison 6 speed lol :D...... Will get some sketches going of my keg intercooler idea and get em on my webpage soonest.
Cheers Sean |
All times are GMT -5. The time now is 03:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands