Mits. 4D56TD Swap
 

I'm swapping in a Mits. 4D56TD eng (1993-1998 Pajero???), manual trans and transfer case into a 2000 Ford Ranger 4x4. The eng. was bought on ebay I guess and sent to my shop by a out of state customer for the swap. The seller is not help'in. This was supposed ta drop right in LOL. :humm:

I need a starter for this as the org. was lost in shipping. Where can I buy one??? I ran out of places to look on the web.

I also need some info on the fuel injection pump. Looks to be setup for computer controls. It looks like it has a TPS on the throttle and 2 solenoids on the pump, a single wire on the rear of the pump ( guess'in this is fuel shut off) and a 2 wire on the eng. side of the pump. What needs to be hooked up to run here???? And what do the solenoids do?

Also where do I hookup the eng. vacuums for the turbo waste gate and such???

Thanks for your time ya'all

Kicn

WOW the starter showed up today, so that takes care of one big problem, been waitt'in since last Nov.:humm: for it. Looks like I'll wire it all tomarrow.