Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Diesel Engine Conversions (https://www.dieselbombers.com/diesel-engine-conversions/)
-   -   Swapping '96 F150 Body on 1991 W350 Dodge Cummins frame (https://www.dieselbombers.com/diesel-engine-conversions/113558-swapping-96-f150-body-1991-w350-dodge-cummins-frame.html)

XRA1D 07-05-2013 02:01 PM

Swapping '96 F150 Body on 1991 W350 Dodge Cummins frame
 
Well guys, bought a 1991 Dodge W350 4x4 5 speed Cummins with 160,000 miles on it for 2 grand!! The only thing is that it has no body on it... So I was going to swap a Cummins into my 96 Ford F150, but it is a half ton frame. So I was thinking and now I'm going to put the Ford body on the Dodge frame. So then I would have a 1 ton frame and the very clean F150 body that I have on top of that!! Has any body done this before? If so, any tips on making the body mounts? We have some ideas that should work.. I would just like some input from some one else lol. Or is this a first???

I'll post pictures as I go along with this and I hope this is in the right section... Lol.. Thanks guys!:jump:

fordheaded 07-05-2013 07:42 PM

Sounds like a plan. I would check with your states DMV on how to handle this or you could just register as the 96 f150. Every state is different. Good luck with it and let's see some pix!!!

XRA1D 07-06-2013 11:11 PM

Ok well the truck is in my garage and I have done a little work on it. But here she is, he 1991 Dodge W350 5 speed Cummins Turbo Diesel with 160,000 miles!http://filebeam.com/b183e9cea7598774...6028bacbdd.jpg

Right now I'm working on removing the rust from the rear of the frame, replacing brake lines, and removing wiring harness. After that is done, it is time to rip apart the Ford! :tu:

tiremann9669 07-07-2013 06:28 PM

Puttin the motor and trans in the F150 would probably be easier, just sayin. :c:

XRA1D 07-07-2013 09:06 PM


Originally Posted by tiremann9669 (Post 1015754)
Puttin the motor and trans in the F150 would probably be easier, just sayin. :c:

Well I don't know. I would have boxed the frame, made custom motor mounts, and brace the front of the frame of a solid axle swap. Right now it is 2 wheel drive too, and I would also like the 1 ton frame and not the 1/2 ton. But it is coming along!:jump:

---AutoMerged DoublePost---

Well I started to get rid of the rust on the frame, I got half of it done today and I will finish it tomorrow... It's not the best but it will do. I still have to chop the back left of the frame off and weld in a new piece of frame because that part is completely shot. Other than that, the frame is not really rusted all the way through... 99% of the rust is surface rust, there are only a few spots where it is rusted all the way through. So here is the right rear of the frame:http://filebeam.com/a87bd7f30234bdd8...1f8b7cb3df.jpg

Still have that L shaped piece of metal to cut off too. Other than that, it is coming along pretty nicely.

tiremann9669 07-08-2013 08:39 AM

Nice even has airbags, keep the pics coming :c:

XRA1D 07-13-2013 08:20 PM

Well I have a quick update, no pictures for tonight... sorry. But tomorrow I'm going to paint the engine red, and valve covers black. I think I might paint a few other things black, but IDK yet. I have also removed a lot of rust off of the frame. I should have some pictures uploaded tomorrow!!

XRA1D 07-15-2013 11:28 PM

Well guys I've painted the engine! Looks real nice in person, but in these pics it looks kind of orange. It is a nice red in person though lol. I think it will look real good in a black truck, and when you pop the hood you will have a nice glowing red block!
It's not perfect, and I still had greasy hands when handling the valve covers so that's why they look kinda spotty! But here ya go:

http://filebeam.com/cb3b4edc3f35ffa0...886562a12e.jpg

http://filebeam.com/e9705e609adfd6cd...616dbf0ca7.jpg

http://filebeam.com/067fbb18b5edabb2...c3137fc946.jpg

Golddigger 08-31-2014 06:08 PM

Well how did it turn out?.........Its been awhile.

dezeldoc 08-31-2014 10:29 PM

My bet is it never got finished.


All times are GMT -5. The time now is 03:11 PM.


© 2024 MH Sub I, LLC dba Internet Brands