7.3 littter wont start
 

P0006 code poops up, i have new batteries and fuel pump, checked relays they seam to be working, NEED HELP ,PLease

I don't know what that code is...

We need more information... Did it just all of a sudden not start... Miles... Mods... Anything you've done recently...

if its turning over just wont start could be fuel bowl heater blowing i think fuse 22 underhood hard to see its blown , disconnect fuel bowl heater get it in the clear re fuse fire it up

tearin2deep thanks ill try that

---AutoMerged DoublePost---

Hey 95 powersmoker, The truck 179950, replaced batteries celinoids and fuel pump , moved relays around to see if other codes would pop up, I would be driving and it would all of the sudden cut power to an idle for a few then pick back up, now it just turns over, its not pumping fuel up to filter on top of engine

---AutoMerged DoublePost---

now i got a P27FE code and the P006 coming up

This would be a correct diagnosis if he is not getting a WTS light...

If you drain the fuel bowl, will the truck refill it? It sounds like you've narrowed it down to a fuel issue...

I still don't know either of those codes, what scanner are you using? Here are the codes our trucks have and I don't see either of those on the lists...

got a new code reader let you know tomarrow how it goes.

New code reader wont connect to truck , Chip programer still shows P006 code , turns over like it is going to fire, heater bowl is not filling, wait to start light comes on. Any ideas ? what to check next?

There is no fuel in the fuel bowl?

check your oil those powerpokes have a murphy switch that kills them on low oil and then they wont start back up ( its similar to the dummy switches in a detroit for oil and coolant levels so the driver cant blow it up) give it a try if you havent already.:tu:

Incorrect... There are no such switches on a 7.3 powerstroke.