Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   Diesel In Distress - Support Ticket (https://www.dieselbombers.com/diesel-distress-support-ticket/)
-   -   1993 Dodge Ram 5.9 wont start (https://www.dieselbombers.com/diesel-distress-support-ticket/38030-1993-dodge-ram-5-9-wont-start.html)

wildbill 12-24-2009 08:58 PM

Pump is out of time. If re-timing it don't help, need to have it re-built.

Randy4541 12-25-2009 08:20 AM

Wildbill merry xmas to u and yours can u tell me how 2 do the timing on the pump please tank you. God bless

wildbill 12-25-2009 02:13 PM

If worse comes to worse, have to tear the front of the engine down and re-time the gears. If it's not there, have to send the pump in and have it completely gone through.

jasonfriedlin 12-26-2009 03:15 PM

Somebody should be able to chime in here and give you a hand. Atleast its breathing and got a lil bit of a pulse, shouldnt take a whole lot more to bring it back the rest of the way. How long has the truck been sitting without running and how long did you let it run for when you got it started?

Randy4541 12-26-2009 05:13 PM

Hi Jason the truck was sitting for over 3 years. When i got it 2 start i let it run for about an hour. Is got real bad miss and lots of white smoke and got a little throle. But not much I think is the pump timing but i tried looking for timing on the site but found nothing. Can some 1 HELP ME PLEASE:argh: Thank You all God Bless

NadirPoint 12-26-2009 07:21 PM

Loosen the three bolts that hold it to the timing case and the one down underneath at the back that bolts it to the throttle bracket. Then push it towards the head. Just an eigth of an inch or so to start with. There's two ways to get at the bottom timing case bolt: Either a "S" wrench, or a verly long (like 2-foot long) extension/socket than can reach all the way back towards where there's clearance for the handle.

If it was recently R&R'd it should move without much trouble, but sometimes they are hard to get moving after the bolts are loosened. A rachet strap clear around it and the engine has worked, as have various handles people have made to hook into the bracket holes. You do not need to loosen the injector lines.

Randy4541 12-26-2009 08:15 PM

Nadir i try doing that work a little better. But still skiping and lots of white smoke.

NadirPoint 12-26-2009 08:28 PM

Is there any adjustment left? Push it some more....

jasonfriedlin 12-27-2009 10:20 AM

If its been sitting that long you might want to try changing the fuel filter, fillin the new one up with seafoam and starting it up. Thats a long time for anything to sit without running. Im assuming the fuel in it may be that old to and possibly has alot of water in it from condensation.

Randy4541 12-27-2009 02:16 PM

Okay i did what nadir said 2 push the pump i went all tha way now i got less smoke and better trottle it reves up slowlee and i still have a skip. Whats my next step guys. And by the way is starts up fast


All times are GMT -5. The time now is 12:06 AM.


© 2024 MH Sub I, LLC dba Internet Brands