turbo help
my turbo has been making a bearing noise when cold i pulled the intake tube off it and the wheel has rubbed on the compressor housing a little bit im trying to take the turbo apart to rebuild it but cant get the exhaust housing off i have the compressor housing and wheel off right now but i need to get the exhaust housing off please help
|
I am assuming you are working on a HX-35
Soak the area where the bearing housing, and exhaust housing meet with a good penetration oil, PB Break Free is a good one. Let it soak for a few minutes, and hit it again with the penetration oil. If you have a vise, gently put the bearing housing in it and tap the exhaust housing off. Don't whack it, less is more here. You want to massage it off over a period of several minutes, not all at once. Make sure your hits go around the axis of the housing at the 12, 6,3, and 9 o'clock positions. You want the housing to come off evenly. That should do it. Good luck:U: |
i got it apart but it looks like there are heat cracks on the inside is this normal?
|
Speaking from experience, I don't know. Personally, I would say not, and would buy another turbo.
|
Updates??
|
its all apart im waiting on the rebuild kit now im taking it with me to school this week to get it cleaned up
|
Updates??
|
Please update. :pca1:
|
Going to close the thread due to inactivity. Thread publisher can reopen the thread and update on the progress.
|
All times are GMT -5. The time now is 10:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands