03 Dodge CR
 

Please Help!!!

problem, original injectors went bad had them changed . ordered online from Industrial Injection & Turbo service ,inc. out of Salt lake city. had them changed . Truck is now making noises in one of the cylinders. does anyone know , could it be one of the injectors are bad? How can I find out.

Who installed the injectors?

I moved this here for better exposure and maybe get you some help faster. :ok1:

Thanks Mike

i have replaced loads of injectors in the 5.9 is a knocking type noise? if so injector my be hanging and not getting its preignition causing excessive knock pull valve cover and disconnect each injector until knock disappears, disconnect with engine off, once you find out which move injector to another cylinder then repeat steps and see if the knock moves if it does replace injector, if it dont make sure high pressure connector is tight and not deformed

Check the wires for a tight connection and make sure that they are all on the correct way also.

I'm thinkin this will be a one hit wonder thread.....

Closing this thread due to a one time post. Last post was on 06-02-2009. Thread starter can reopen if need be.