Cummins Injector Nozzles
 

Got a special going on right now with 98.5-02 Cummins 24V Injector Nozzles.

50hp
75hp
100hp
125hp
150hp

got any uber cool 1k hp nozzels?

How many sets you need? Cause you know you could save some money and just run a dual injector setup with 500hp sticks. :humm:

lol....I only need one 1k horse injector and five 100 horse injectors....then I should have 1500 hp right?:pca1::w2::humm:

Yup :U:

Hot damn!!!

:pca1:

hey guys anny one no what the P.S.I sould be at the injector on a 01 cummins?

just install the extra nozzles in the extra valve hole, it'll run on only one intake valve, and two exhaust right ????????? :argh:

my 01 cummins will not start i am gettin fule to the injectors i have tried bleeding them but still wont start will fier in starting fluid but will not run?

Did you crack open one of the lines and let the lift pump run until you start seeing fuel comming out of the line?

Any codes???

Unless you have the grid heaters pulled out or disconnected NEVER use starting fluid on these engines!

We also have 200hp and 250hp Nozzles

Hi I'm new to Diesel Bombers, I have an 02' Cummins dually and was lookin for new injector nozzles. I want to go with the 150 Hp nozzles but am tryin to find them for a good low price. Do you know where I can git the best bang for the buck?

:pm:

TTT

i had a set of the 150s one my truck, dynoed 321 with no programmer.only fueling upgrade was the injectors :U:

Hole count and country of origin?

These are 8 Hole. They are the exact samething as a Edge Jammer Nozzle.

Hey Luke, with my setup would I be able to run the 125's with no turbo upgrade without a problem? I wanted a set of 110 injectors but will settle for nozzles.

You will be able to run 125's but it will get hot quick with your stock turbo. Keep the Edge down and you will be fine until you get a new turbo.


Luke

:argh:

Were working on some 200hp and 250hp Nozzles.

:U:

how much are the nozzels man?

What size you looking for?

Hey Luke, mow much for 50's & 75's?
I should be able to run them with stock fuel system right?

As long as your stock lift pump is still making good pressure.

ok thanks bro:c:

Hows that CTS?

any 12 valve injectors needin some bad id like 100 or 150

Full Injectors or just Nozzles?

We also have some 94-98 12V Injectors that are a bit hotter than 370's but with the correct spray pattern.

No Core Charge

Re: Cummins Injector Nozzles
 

We can also build a set of injectors using Bosch RV275 Nozzles. We use genuine Bosch Nozzles.

Sent from my DROID2 using Tapatalk

I love it, thanks again.

How much for 125hp nozzels

about 310bar or 4557 psi ish

We have our Big Dawg 7 hole Nozzles available in 100hp, 150hp and 200hp.

shoot me a price on the 250's and a little info about them

Re: Cummins Injector Nozzles
 

PM Sent

Sent from my Rooted Droid 2.