Guess not.

better late than never pics.
 

Finally got pictures up. there are about 30 of them.
Picasa Web Albums - Dieselautopower - twin pics

1st 7 pictures are of a finished set of s300/s400 for a 3rd gen


rest of the pictures are of an install on a 2nd gen hx35/ht3b

Tried to post up pics but I'm not all that good with computers.

for info

Stovepipe, what info do you want?

I just wanted to make sure I could find this post again, what kind (brand) of turbos are they for a 2nd gen and whats the different between the 2nd gen s300/s400 and 2nd gen Stock/BHT3B to make the price the same if your using the stock turbo?

Piping kit + flanges filter downpipe etc is $1200 + 100 rebate= $1100

turbos are sold separately. The s300/400 is a more efficeint set up and will support more HP. But if you are towing and not trying to stay in a budget the stock over ht3b is a better option as you only have to buy one turbo and you can support 550HP.

thank you

is it possible to get more than 550 hp out of the stock turbo with ht3b turbo... and could u get a kit that has a flange for a stock turbo with an after market turbine housing?

WOW THESE PRICES ARE AMAZING

you can get up to about 600HP with hx35/ht3b but 550HP is better, especailly if you have not changed to a 14cm WG exhaust housing. If you are planning on going over 550-600HP you would be better off going with a s300/400. The modified 62mm s300 I have for under $1000 in my turbo group buy has a modified wastegate that will let you run the twins w/o an external wastegate.

not sure what your question is about an after market flange, can you give more details?